Registered users receive a variety of benefits including the ability to customize email alerts, create favorite journals list, and save searches.
Please note that a BioOne web account does not automatically grant access to full-text content. An institutional or society member subscription is required to view non-Open Access content.
Contact helpdesk@bioone.org with any questions.
Studies to evaluate the effect of application time of day (TOD) and protoporphyrinogen IX oxidase (PPO)-inhibiting herbicide–resistant Palmer amaranth on the efficacy of commonly used herbicides was conducted in Tennessee in 2017 and 2018. Treatments of fomesafen, lactofen, acifluorfen, paraquat, glufosinate, glufosinate plus fomesafen, paraquat plus fomesafen, and paraquat plus metribuzin were applied to PPO-resistant (PPO-R) and PPO-susceptible (PPO-S) Palmer amaranth at sunrise and midday. Control of Palmer amaranth with acifluorfen, glufosinate, and glufosinate plus fomesafen was greater with the midday application. However, control of Palmer amaranth with paraquat-based treatments was greater with the sunrise application. TOD effects on PPO-inhibiting herbicides and paraquat-based treatments were more prominent for the PPO-R Palmer amaranth biotype. The TOD effect observed when applying glufosinate in early morning hours on PPO-S Palmer amaranth can be minimized by adding fomesafen to the tank mix. However, this strategy did not provide consistent performance on PPO-R Palmer amaranth. The percentages of living Palmer amaranth plants and control were greater when paraquat plus metribuzin was applied to both biotypes. These results highlight the necessity of at least two effective herbicide sites of action for POST applications intended for controlling PPO-R Palmer amaranth. In addition, the timing of herbicide applications can affect their activity in both PPO-R and PPO-S Palmer amaranth populations.
Kochia is one of the most problematic weeds in the United States. Field studies were conducted in five states (Wyoming, Colorado, Kansas, Nebraska, and South Dakota) over 2 yr (2010 and 2011) to evaluate kochia control with selected herbicides registered in five common crop scenarios: winter wheat, fallow, corn, soybean, and sugar beet to provide insight for diversifying kochia management in crop rotations. Kochia control varied by experimental site such that more variation in kochia control and biomass production was explained by experimental site than herbicide choice within a crop. Kochia control with herbicides currently labeled for use in sugar beet averaged 32% across locations. Kochia control was greatest and most consistent from corn herbicide programs (99%), followed by soybean (96%) and fallow (97%) herbicide programs. Kochia control from wheat herbicide programs was 93%. With respect to the availability of effective herbicide options, glyphosate-resistant kochia control was easiest in corn, soybean, and fallow, followed by wheat; and difficult to manage with herbicides in sugar beet.
Nomenclature: Glyphosate; kochia, Bassia scoparia (L.) A. J. Scott, KCHSC; corn, Zea mays L. ZEAMX; soybean, Glycine max (L.) Merr. GLXMA; sugar beet, Beta vulgaris L. BEAVX; wheat, Triticum aestivum L. TRZAX
Glyphosate-resistant (GR) kochia has been reported across the western and midwestern United States. From 2011 to 2014, kochia seed was collected from agronomic regions across Colorado to evaluate the frequency and distribution of glyphosate-, dicamba-, and fluroxypyr-resistant kochia, and to assess the frequency of multiple resistance. Here we report resistance frequency as percent resistance within a population, and resistance distribution as the percentage and locations of accessions classified as resistant to a discriminating herbicide dose. In 2011, kochia accessions were screened with glyphosate only, whereas from 2012 to 2014 kochia accessions were screened with glyphosate, dicamba, and fluroxypyr. From 2011 to 2014, the percentages of GR kochia accessions were 60%, 45%, 39%, and 52%, respectively. The percentages of dicamba-resistant kochia accessions from 2012 to 2014 were 33%, 45%, and 28%, respectively. No fluroxypyr-resistant accessions were identified. Multiple-resistant accessions (low resistance or resistant to both glyphosate and dicamba) from 2012 to 2014 were identified in 14%, 15%, and 20% of total sampled accessions, respectively. This confirmation of multiple glyphosate and dicamba resistance in kochia accessions emphasizes the importance of diversity in herbicide site of action as critical to extend the usefulness of remaining effective herbicides such as fluroxypyr for management of this weed.
Nomenclature: Dicamba; fluroxypyr; glyphosate; kochia, Bassia scoparia (L.) A.J. Scott
Halauxifen-methyl is an auxin herbicide for broadleaf weed control in preplant applications to corn and soybean. Our objective for this research was to characterize the phytotoxicity of halauxifen-methyl on horseweed, relative to 2,4-D and dicamba, in terms of weed height, the response to an auxin synergist, and root activity. The 50% reduction in plant growth (GR50) value for halauxifen-methyl on rosette-sized plants was 0.05 g ae ha–1, 100 times less than the labeled use rate of 5 g ae ha–1, compared with 36 and 31 g ha–1 for 2,4-D and dicamba, respectively. In a whole-plant bioassay, 240 g ae ha–1 of 2,4-D was calculated as the GR50 value on horseweed 20-cm tall, whereas applications of only 53 and 0.40 g ae ha–1 were necessary for dicamba and halauxifen-methyl, respectively, to achieve the same response. As weed size decreased, there was a concomitant reduction in the estimated herbicide dose for the GR50 with similar differences observed between halauxifen-methyl and the other two auxin herbicides. The addition of diflufenzopyr, an auxin synergist, to 2,4-D and dicamba resulted in a synergistic response on horseweed. However, the addition of diflufenzopyr to halauxifen-methyl resulted in an additive or antagonistic effect, depending on rate of diflufenzopyr, demonstrating a distinctive physiological pathway for halauxifen-methyl compared with 2,4-D and dicamba. In the agar-based bioassays, GR50 values for horseweed root length for 2,4-D and dicamba were 0.16 and 0.19 µM, respectively, whereas only 0.004 µM halauxifen-methyl was required for a comparable root response. These results indicate that horseweed exhibits a high level of sensitivity to halauxifen-methyl and suggest the activity of halauxifen-methyl is different from that of 2,4-D and dicamba. These differences in herbicide activity may reflect differential absorption, translocation, metabolism, or targeting of auxin receptors found in horseweed.
Nomenclature: 2,4-D; dicamba; diflufenzopyr; halauxifen-methyl; corn, Zea mays L.; horseweed, Conyza canadensis L. Cronq. ERICA; soybean, Glycine max L.
Synthetic-auxin herbicides are often applied for horseweed control before soybean planting. However, certain days of planting interval must be maintained before soybean planting, depending on the product and rate used, because of potential crop phytotoxicity. Halauxifen-methyl is a new synthetic-auxin herbicide for horseweed control in preplant applications in soybean. Field experiments were conducted in 2015 and 2016 in Indiana to evaluate soybean phytotoxicity in response to applications of halauxifen-methyl (5 g ae ha–1) at five preplant intervals (0, 1, 2, 3, and 4 weeks before planting [WBP]). In 2015, soybean phytotoxicity was not observed for any of the preplant intervals at any of the sites. In 2016, 0% to 15% phytotoxicity was observed at 14 d after planting (DAP) when halauxifen-methyl was applied at planting, 1 WBP, and 2 WBP at different sites. Soybean phytotoxicity was expressed in the unifoliate leaves only at 14 DAP. However, the first trifoliate did not show any injury symptoms at 21 DAP from any preplant application timing. Preplant application intervals for halauxifen-methyl did not affect soybean stand counts or grain yield in any site-year. Therefore, field results indicated that halauxifen-methyl applied alone can cause slight soybean phytotoxicity in preplant applications. In growth-chamber bioassays, reductions in soybean biomass, plant length, and emergence were accentuated at 30 C, compared with 20 or 15 C, when halauxifen-methyl was applied at 20 or 40 g ae ha–1. These results contradict the currently held paradigm in which lower temperatures generally increase crop phytotoxicity levels to herbicide soil residual.
Nomenclature: 2,4-D; dicamba; halauxifen-methyl; horseweed, Erigeron canadensis L. ERICA; soybean, Glycine max (L.) Merr.
Rapeseed is a popular cover crop choice due to its deep-growing taproot, which creates soil macropores and increases water infiltration. Brassicaceae spp. that are mature or at later growth stages can be troublesome to control. Experiments were conducted in Delaware and Virginia to evaluate herbicides for terminating rapeseed cover crops. Two separate experiments, adjacent to each other, were established to evaluate rapeseed termination by 14 herbicide treatments at two timings. Termination timings included an early and late termination to simulate rapeseed termination prior to planting corn and soybean, respectively, for the region. At three locations where rapeseed height averaged 12 cm at early termination and 52 cm at late termination, glyphosate + 2,4-D was most effective, controlling rapeseed 96% 28 d after early termination (DAET). Paraquat + atrazine + mesotrione (92%), glyphosate + saflufenacil (91%), glyphosate + dicamba (91%), and glyphosate (86%) all provided at least 80% control 28 DAET. Rapeseed biomass followed a similar trend. Paraquat + 2,4-D (85%), glyphosate + 2,4-D (82%), and paraquat + atrazine + mesotrione (81%) were the only treatments that provided at least 80% control 28 d after late termination (DALT). Herbicide efficacy was less at Painter in 2017, where rapeseed height was 41 cm at early termination, and 107 cm at late termination. No herbicide treatments controlled rapeseed >80% 28 DAET or 28 DALT at this location. Herbicide termination of rapeseed is best when the plant is small; termination of large rapeseed plants may require mechanical of other methods beyond herbicides.
Burning postharvest sugarcane residue is a standard practice to remove extraneous leaf material before spring regrowth. Live-fires were simulated from field-collected postharvest sugarcane residue and seeds of divine nightshade and itchgrass were exposed to dry and moistened postharvest residue (PHR) at four densities (6.1, 12.1, 18.2, and 24.2 Mg ha–1) and a nonburned control. The moisture content of residue exposed to simulated rainfall was 14% more in Experiment 2 than Experiment 1; however, burning PHR with 44% moisture when wind speeds were lower allowed the fire to continue and created a smoldering effect that reduced weed emergence by 23% when compared with burning PHR with 30% moisture during breezy conditions. The moistened 6.1 Mg ha–1 PHR treatment resulted in 53% more divine nightshade and itchgrass emergence when compared with dry 6.1 Mg ha–1 PHR after burning, and greater emergence was attributed to more seed survival for divine nightshade than itchgrass. The PHR moisture condition failed to influence the burn duration; however, the burn duration increased 103% and 56% as the amount of PHR increased from 6.1 to 12.1 Mg ha–1 and 12.1 to 18.2 Mg ha–1, respectively. The combination of high wind speeds and moistened PHR did not enhance the maximum burn temperature near the soil surface, but surface-deposited divine nightshade and itchgrass seeds were susceptible to prolonged exposure times at 100 C. Burning PHR from fields with poor stands or older ratoon, especially when PHR is abundantly wet, will not produce temperatures lethal to divine nightshade and itchgrass seeds. The fluid-filled and fleshy content that comprises divine nightshade fruit protected seed from short durations of high temperatures, but may not insulate seeds long enough when exposed to a smoldering fire.
Pigweed is difficult to manage in grain sorghum because of widespread herbicide resistance, a limited number of registered effective herbicides, and the synchronous emergence of pigweed with grain sorghum in Kansas. The combination of cultural and mechanical control tactics with an herbicide program are commonly recognized as best management strategies; however, limited information is available to adapt these strategies to dryland systems. Our objective for this research was to assess the influence of four components, including a winter wheat cover crop (CC), row-crop cultivation, three row widths, with and without a herbicide program, on pigweed control in a dryland system. Field trials were implemented during 2017 and 2018 at three locations for a total of 6 site-years. The herbicide program component resulted in excellent control (>97%) in all treatments at 3 and 8 weeks after planting (WAP). CC provided approximately 50% reductions in pigweed density and biomass for both timings in half of the site-years; however, mixed results were observed in the remaining site-years, ranging from no attributable difference to a 170% increase in weed density at 8 WAP in 1 site-year. Treatments including row-crop cultivation reduced pigweed biomass and density in most site-years 3 and 8 WAP. An herbicide program is required to achieve pigweed control and should be integrated with row-crop cultivation or narrow row widths to reduce the risk of herbicide resistance. Additional research is required to optimize the use of CC as an integrated pigweed management strategy in dryland grain sorghum.
Successful pigweed management requires an integrated strategy to delay the development of resistance to any single control tactic. Field trials were implemented during 2017 and 2018 in three counties in Kansas on dryland (limited rainfall, nonirrigated), glufosinate-resistant soybean. The objective was to assess pigweed control with combinations of a winter wheat cover crop (CC), three soybean row widths (76, 38, and 19 cm), row-crop cultivation 2.5 weeks after planting (WAP), and an herbicide program to develop integrated pigweed management recommendations. All combinations of the four components were assessed by 16 treatments. All treatments with the herbicide program resulted in excellent (>97%) pigweed control and were analyzed separately from the other components. Treatments containing row-crop cultivation reduced pigweed density and biomass 3 and 8 WAP in all locations compared with the 76-cm row width plus no CC treatment. CC impacts were mixed. In Riley County, Palmer amaranth density and biomass were reduced; in Reno County, no additional Palmer amaranth control was observed; in Franklin County, the CC had greater waterhemp density and biomass compared with the treatments containing no CC. Narrow row widths achieved the most consistent results of all cultural components when data were pooled across locations: Decreasing row widths from 76 to 38 cm resulted in a 23% reduction in pigweed biomass 8 WAP and decreasing row width from 38 to 19 cm achieved a 15% reduction. Row-crop cultivation should be incorporated where possible as a mechanical option to manage pigweed, and narrow row widths should be used to suppress late-season pigweed growth when feasible. Inconsistent pigweed control from CC was achieved and should be given special consideration before implementation. The integral use of these components with an herbicide program as a system should be recommended to achieve the best pigweed control and reduce the risk of developing herbicide resistance.
Nomenclature: glufosinate; pigweed, Amaranthus spp., Palmer amaranth, Amaranthus palmeri S. Watson; waterhemp, Amaranthus tuberculatus (Moq.) J. D. Sauer; soybean, Glycine max (L.) Merr.; winter wheat, Triticum aestivum L.
S-Metolachlor is commonly used by soybean and cotton growers, especially with POST treatments for overlapping residuals, to obtain season-long control of glyphosate- and acetolactate synthase (ALS)–resistant Palmer amaranth. In Crittenden County, AR, reports of Palmer amaranth escapes following S-metolachlor treatment were first noted at field sites near Crawfordsville and Marion in 2016. Field and greenhouse experiments were conducted to confirm S-metolachlor resistance and to test for cross-resistance to other very-long-chain fatty acid (VLCFA)–inhibiting herbicides in Palmer amaranth accessions from Crawfordsville and Marion. Palmer amaranth control in the field (soil <3% organic matter) 14 d after treatment (DAT) was ≥94% with a 1× rate of acetochlor (1,472 g ai ha–1; emulsifiable concentrate formulation) and dimethenamid-P (631 g ai ha–1). However, S-metolachlor at 1,064 g ai ha–1 provided only 76% control, which was not significantly different from the 1/2× and 1/4× rates of dimethenamid-P and acetochlor (66% to 85%). In the greenhouse, Palmer amaranth accessions from Marion and Crawfordsville were 9.8 and 8.3 times more resistant to S-metolachlor compared with two susceptible accessions based on LD50 values obtained from dose–response experiments. Two-thirds and 1.5 times S-metolachlor at 1,064 g ha–1 were the estimated rates required to obtain 90% mortality of the Crawfordsville and Marion accessions, respectively. Data collected from the field and greenhouse confirm that these accessions have evolved a low level of resistance to S-metolachlor. In an agar-based assay, the level of resistance in the Marion accession was significantly reduced in the presence of a glutathione S-transferase (GST) inhibitor, suggesting that GSTs are the probable resistance mechanism. With respect to other VLCFA-inhibiting herbicides, Marion and Crawfordsville accessions were not cross-resistant to acetochlor, dimethenamid-P, or pyroxasulfone. However, both accessions, based on LD50 values obtained from greenhouse dose–response experiments, exhibited reduced sensitivity (1.5- to 3.6-fold) to the tested VLCFA-inhibiting herbicides.
Weeds are among the main limitations on chickpea production in Iran. The efficacy of herbicide treatments including linuron PPI, imazethapyr PPI, PRE, and POST, pendimethalin PPI and POST, bentazon POST, pyridate POST, and oxadiazon POST along with one or two hand weedings were evaluated for weed control and yield response in rain-fed chickpea in Aleshtar, Lorestan, Iran in 2015 and 2016. Wild safflower, threehorn bedstraw, wild mustard, and hoary cress were the predominant weed species in both experimental years. Total weed dry biomass in weedy check plots averaged 187 and 238 g m–2 in 2015 and 2016, respectively, and weed density and biomass were reduced in all treatments compared to the weedy check in both years. Treatments composed of pyridate followed by one hand weeding or imazethapyr POST followed by two hand weedings resulted in the lowest weed biomass. The presence of weeds reduced yield by 74% and 66% in the weedy check plots compared to the weed-free control plots in 2015 and 2016, respectively. Application of oxadiazon, bentazon, and imazethapyr PPI, PRE, and POST resulted in lower chickpea yields. All herbicides tested injured chickpea slightly, with pyridate causing the least injury.
Smallflower umbrella sedge is a prolific C3 weed commonly found in rice fields in 47 countries. The increasing infestation of herbicide-resistant smallflower umbrella sedge populations threatens rice production. Our objectives for this study were to characterize thermal requirements for germination of smallflower umbrella sedge seeds from rice fields in California and to parameterize a population thermal-time model for smallflower umbrella sedge germination. Because the use of modeling techniques is hampered by the lack of thermal-time model parameters for smallflower umbrella sedge seed germination, trials were carried out by placing field-collected seeds in a thermogradient table set at constant temperatures of 11.7 to 41.7 C. Germination was assessed daily for 30 d, and the whole experiment was repeated a month later. Using probit regression analysis, thermal time to median germination [θT(50)], base temperature for germination (Tb), and SD of thermal times for germination [σθT(50)] were estimated from germination data, and model parameters were derived using the Solver tool in Microsoft Excel®. Germination rates increased linearly below the estimated optimum temperatures of 33.5 to 36 C. Estimated Tb averaged 16.7 C, whereas θT(50) equaled 17.1 degree-days and σθT(50) was only 0.1 degree-day. The estimated Tb for smallflower umbrella sedge is remarkably higher than that of japonica and indica types of rice, as well as Tb of important weeds in the Echinochloa complex. Relative to the latter, smallflower umbrella sedge has lower thermal-time requirements to germination and greater germination synchronicity. However, it would also initiate germination much later because of its higher Tb, given low soil temperatures early in the rice growing season in California. When integrated into weed growth models, these results might help optimize the timing and efficacy of smallflower umbrella sedge control measures.
Goldenrods are common perennial weeds in lowbush blueberry fields in Nova Scotia. Management options are limited to mowing and suppression with POST mesotrione applications. The objectives of this research were to (1) compare efficacy of single versus sequential nonbearing-year POST mesotrione applications on goldenrod (2) identify the optimal interval between sequential POST mesotrione applications (3) evaluate nonbearing-year POST bicyclopyrone applications on goldenrod, and (4) evaluate nonbearing-year summer and fall herbicide spot treatments on goldenrod. POST mesotrione applications at 144 g ai ha–1 caused 39% to 77% injury but did not reduce goldenrod shoot density. In contrast, mesotrione applications at 144 g ai ha–1 followed by sequential mesotrione application at 14, 21, or 28 days after initial treatment caused greater than 90% injury to goldenrod and reduced both nonbearing- and bearing-year shoot density. POST bicyclopyrone applications at 50 g ai ha–1 caused 69% to 80% injury to goldenrod but did not reduce shoot density. A bicyclopyrone plus mesotrione tank mixture did not improve goldenrod control relative to mesotrione or bicyclopyrone alone. Summer spot applications of glyphosate (7.24 g ae L water–1), glufosinate (0.75 g ai L water–1), and mesotrione (0.72 g ai L water–1) consistently injured goldenrod and reduced both nonbearing- and bearing-year shoot density. Summer spot applications of bicyclopyrone (0.25 g ai L water–1), flazasulfuron (0.31 g ai L water–1), dicamba (1 g ae L water–1), dicamba plus diflufenzopyr (0.7 g ae L water–1 plus 0.3 g ai L water–1), triclopyr (1.68 g ai L water–1), clopyralid (0.08 g ai L water–1), tribenuron methyl (0.2 g ai L water–1), and foramsulfuron (0.2 g ai L water–1) injured goldenrod but did not consistently reduce shoot density. When these herbicides were evaluated as fall spot applications, only glyphosate reduced goldenrod shoot density in the year after application.
Residual herbicides are routinely applied to control troublesome weeds in pumpkin production. Fluridone and acetochlor, Groups 12 and 15 herbicides, respectively, provide broad-spectrum PRE weed control. Field research was conducted in Virginia and New Jersey to evaluate pumpkin tolerance and weed control to PRE herbicides. Treatments consisted of fomesafen at two rates, ethalfluralin, clomazone, halosulfuron, fluridone, S-metolachlor, acetochlor emulsifiable concentrate (EC), acetochlor microencapsulated (ME), and no herbicide. At one site, fluridone, acetochlor EC, acetochlor ME, and halosulfuron injured pumpkin 81%, 39%, 34%, and 35%, respectively, at 14 d after planting (DAP); crop injury at the second site was 40%, 8%, 19%, and 33%, respectively. Differences in injury between the two sites may have been due to the amount and timing of rainfall after herbicides were applied. Fluridone provided 91% control of ivyleaf morningglory and 100% control of common ragweed at 28 DAP. Acetochlor EC controlled redroot pigweed 100%. Pumpkin treated with S-metolachlor produced the most yield (10,764 fruits ha–1) despite broadcasting over the planted row; labeling requires a directed application to row-middles. A separate study specifically evaluated fluridone applied PRE at 42, 84, 126, 168, 252, 336, and 672 g ai ha–1. Fluridone resulted in pumpkin injury ≥95% when applied at rates of ≥168 g ai ha–1; significant yield loss was noted when the herbicide was applied at rates >42 g ai ha–1. We concluded that fluridone and acetochlor formulations are unacceptable candidates for pumpkin production.
This article is only available to subscribers. It is not available for individual sale.
Access to the requested content is limited to institutions that have
purchased or subscribe to this BioOne eBook Collection. You are receiving
this notice because your organization may not have this eBook access.*
*Shibboleth/Open Athens users-please
sign in
to access your institution's subscriptions.
Additional information about institution subscriptions can be foundhere
