Genetic similarities between johnsongrass and grain sorghum leave producers with limited herbicide options for postemergence johnsongrass control. TamArk^TM grain sorghum with resistance to acetyl-CoA carboxylase-inhibiting herbicides was developed through a collaboration between the University of Arkansas System Division of Agriculture and Texas A&M AgriLife Research. Two field experiments were conducted in 2021 in two locations each: Keiser and Marianna, AR, or Fayetteville and Marianna, AR. The objective of the first was to determine the optimal rate and application timing of fluazifop-butyl for control of natural johnsongrass populations in a noncrop setting, and the objective of the second was to evaluate johnsongrass control and TamArk^TM grain sorghum tolerance in response to fluazifop-butyl applied at different timings and rates based on crop growth stage. The highest levels of johnsongrass control occurred when sequential applications of fluazifop-butyl were utilized. All sequential treatments provided at least 80% johnsongrass control at any rate or application timing tested. A single application of fluazifop-butyl provided greater than 90% johnsongrass control when applied at 210 g ai ha–¹ to johnsongrass with fewer than 6 leaves. Weed size played a role in achieving high levels of johnsongrass control. Greater than 90% control was achieved when johnsongrass had 6 leaves or fewer at the initial application for the sequential application treatments. A single application of fluazifop-butyl at 105 g ai ha–¹ resulted in no more than 82% johnsongrass mortality at any application timing. TamArk™ grain sorghum injury did not exceed 6% at any application timing or rate. It was therefore considered to be safe even if the initial application was made before the 6-leaf crop stage. Because no unacceptable levels of injury were observed with TamArk™ grain sorghum for fluazifop-butyl, johnsongrass size at the time of application should be the most critical aspect for control with this herbicide.

Nomenclature: fluazifop-butyl; johnsongrass, Sorghum halepense (L.) Pers.; grain sorghum, Sorghum bicolor (L.) Moench

The herbicides that inhibit very-long-chain fatty acid (VLCFA) elongases are primarily used for residual weed control in corn, barley, oat, sorghum, soybean, sugarcane, certain vegetable crops, and wheat production fields in the United States. They act primarily by inhibiting shoot development of susceptible species, preventing weed emergence and growth. The objectives of this review were to summarize 1) the chemical family of VLCFA-inhibiting herbicides and their use in the United States, 2) the VLCFA biosynthesis in plants and their site of action, 3) VLCFA-inhibitor resistant weeds and their mechanism of resistance, and 4) the future of VLCFA-inhibiting herbicides. After their reclassification as Group 15 herbicides to include shoot growth-inhibiting herbicides (Group 8), the VLCFA-inhibiting herbicides are currently represented by eight chemical families (benzofurans, thiocarbamates, α-chloroacetamides, α-oxyacetamides, azolyl-carboxamides, isoxazolines, α-thioacetamides, and oxiranes). On average, VLCFA-inhibiting herbicides are applied once a year to both corn and soybean crops in the United States with acetochlor and S-metolachlor being the most used VLCFA-inhibiting herbicides in corn and soybean production, respectively. The site of action of Group 15 herbicides results from inhibition of the VLCFA synthase, which is encoded by several fatty acid elongase (FAE1)-like genes in VLCFA elongase complex in an endoplasmic reticulum. The VLCFA synthase is a condensing enzyme, and relies on a conserved, reactive cysteinyl sulfur in its active site that performs a nucleophilic attack on either the natural substrate (fatty acyl-CoA) or the herbicide. As of August 2023, 13 weed species have been documented to be resistant to VLCFA inhibitors, including 11 monocot weeds and two dicot weeds (Palmer amaranth and waterhemp). The isoxazolines (pyroxasulfone and fenoxasulfone) are the most recently (2014) discovered VLCFA-inhibiting herbicides. Although the intensity of VLCFA-inhibitor-directed discovery efforts has decreased over the past decade, this biochemical pathway remains a viable mechanistic target for the discovery of herbicide premixes and a valuable component of them.

Nomenclature: Acetochlor; α-chloroacetamides; α-oxyacetamides; α-thioacetamides; azolyl-carboxamides; benzofurans; fenoxasulfone; isoxazolines; thiocarbamates; oxiranes; S-metolachlor; pyroxasulfone; Palmer amaranth, Amaranthus palmeri S. Watson; waterhemp, Amaranthus tuberculatus (Moq) J.D. Sauer; barley, Hordeum vulgare L.; corn, Zea mays L.; oat, Avena sativa L.; sorghum, Sorghum bicolor (L.) Moench; soybean, Glycine max L.; sugarcane, Saccharum officinarum L.; wheat, Triticum aestivum L.

Knotroot foxtail has become more prevalent and problematic in pastures and hayfields in the southeastern United States. Gaps exist in our knowledge of which herbicide practices are best for managing this species in bermudagrass forage production. This study was conducted to determine the efficacy of various ways to control knotroot foxtail in bermudagrass with herbicide applications in autumn, postemergence (POST), with and without also applying a herbicide in preemergence (PRE), in spring. The study was a randomized complete block with a factorial arrangement of treatments and included a nontreated control for both fall and spring timings. Glyphosate at two rates (0.35 or 0.7 kg ae ha–¹), nicosulfuron (0.07 kg ai ha–¹) + metsulfuron (0.012 kg ai ha–¹), and hexazinone (1.3 kg ai ha–¹) were applied alone in the fall or followed by indaziflam (0.067 kg ai ha–¹) or pendimethalin (4.46 kg ai ha–¹) in the spring. Three harvests were conducted throughout the growing season to evaluate weed species (knotroot foxtail, large crabgrass, and horsenettle) and bermudagrass biomass as well as overall species composition. The combination of fall and spring treatments did not affect weed species or bermudagrass biomass. Therefore, treatment main effects were analyzed by fall or spring application timing. A spring application of either pendimethalin or indaziflam increased bermudagrass biomass compared with that of the nontreated control. However, neither PRE herbicide effectively reduced knotroot foxtail biomass compared with the nontreated control, although pendimethalin did reduce season-long knotroot foxtail composition. Spring PRE herbicides are an effective tool for forage producers, but further research is needed to identify effective herbicides and additional approaches for the control of knotroot foxtail.

Nomenclature: Glyphosate; hexazinone; indaziflam; metsulfuron-methyl; nicosulfuron; pendimethalin; Carolina horsenettle; Solanum carolinense L. SOLCA; knotroot foxtail; Setaria parviflora (Poir.) Kerguélen] SETGE; large crabgrass; Digitaria sanguinalis (L.) Scop. DIGSA; bermudagrass; Cynodon dactylon (L.) Pers. CYNDA

Preemergence applications of mesotrione, an herbicide that inhibits 4-hydroxyphenolpyruvate dioxygenase (HPPD), have recently gained regulatory approval in soybean varieties with appropriate traits. Giant ragweed is an extremely competitive broadleaf weed, and biotypes resistant to acetolactate synthase inhibitors (ALS-R) can be particularly difficult to manage with soil-residual herbicides in soybean production. This study investigated control of giant ragweed from preemergence applications of cloransulam (32 g ai ha–¹), metribuzin (315 g ai ha–¹), and S-metolachlor (1,600 g ai ha–¹) in a factorial design with and without mesotrione (177 g ai ha–¹) at two different sites over 2 yr. Treatments with mesotrione were also compared with two commercial premix products: sulfentrazone (283 g ai ha–¹) and cloransulam (37 g ai ha–¹), and chlorimuron (19 g ai ha–¹), flumioxazin (69 g ai ha–¹), and pyroxasulfone (87 g ai ha–¹). At 42 d after planting, control and biomass reduction of giant ragweed were greater in treatments with mesotrione than any treatment without mesotrione. Giant ragweed biomass was reduced by 84% in treatments with mesotrione, whereas treatments without mesotrione did not reduce biomass relative to the nontreated. Following these preemergence applications, sequential herbicide treatments utilizing postemergence applications of glufosinate (655 g ai ha–¹) plus fomesafen (266 g ai ha–¹) and S-metolachlor (1,217 g ai ha–¹) resulted in at least 97% control of giant ragweed at 42 d after planting, which was greater than sequential applications of glufosinate alone in 3 of 4 site-years. Preemergence applications of mesotrione can be an impactful addition to soybean herbicide programs designed to manage giant ragweed, with the potential to improve weed control and delay the onset of herbicide resistance by providing an additional effective herbicide site of action.

Nomenclature: Chlorimuron; cloransulam; flumioxazin; fomesafen; glufosinate; mesotrione; metribuzin; pyroxasulfone; S-metolachlor; sulfentrazone; giant ragweed; Ambrosia trifida L. AMBTR; soybean; Glycine max (L.) Merr.

Palmer amaranth, which is resistant to glyphosate and protoporphyrinogen oxidase inhibitors, remains a threat to cotton and soybean production in Tennessee. This is partly due to the recent evolution of dicamba-resistant Palmer amaranth in western Tennessee, which further complicates weed management. Experiments were conducted in 2021 and 2022 to determine the best timing between sequential applications and the order in which 2,4-D or dicamba should be used with glufosinate to control resistant Palmer amaranth. Palmer amaranth control increased when the interval between postemergence herbicide applications decreased from 21 to 7 d. At the 7-d interval in a dicamba-based system, the order of herbicides did not affect Palmer amaranth control. However, in a 2,4-D-based system, the greatest control was achieved when 2,4-D was applied first, followed by either 2,4-D or glufosinate. While weed height at the time of application had a significant effect on Palmer amaranth control with auxin herbicides, control was still unacceptable in the field at the labeled rates of dicamba or 2,4-D when applied to weeds that were <10 cm tall (48% and 53%, respectively). Neither dicamba nor 2,4-D provided acceptable control of the Palmer amaranth populations evaluated in this study. Sequential applications separated by 7 d provided better weed control than those separated by 21 d. Given that the better 7-d sequential treatments provided less than 90% control and resulted in more than 64,000 surviving Palmer amaranth plants per hectare suggests that relying solely on these herbicides for Palmer amaranth control is not a sustainable weed management strategy.

Nomenclature:

2,4-D; dicamba; glufosinate; Palmer amaranth; Amaranthus palmeri S. Wats; cotton; Gossypium hirsutum L.; soybean; Glycine max L. Merr.

Herbicides that inhibit protoporphyrinogen oxidase (PPO) are used in more than 40 agronomic and specialty crops across Georgia to manage weeds through residual and postemergence (POST) control. In 2017, a population of Palmer amaranth exhibiting reduced sensitivity to POST applications of PPO-inhibiting herbicides was identified by the University of Georgia. Seed were collected from the site along with a known sensitive population; distance between the samples was 200 m, increasing the likelihood of similar environmental and genetic characteristics. To quantify sensitivity for both preemergence (PRE) and POST uses, 21 greenhouse dose-response assessments were conducted from 2017 to 2022. After conducting initial rate-response studies, 13 doses per herbicide were chosen for the POST experiment; field use rates of fomesafen (420 g ai ha–¹), lactofen (219 g ai ha–¹), acifluorfen (420 g ai ha–¹), and trifludimoxazin (25 g ai ha–¹) ranging from 0× to 4× the field use rate for the susceptible population, and 0× to 40× for the suspect population were applied. Herbicide treatments included adjuvants and were applied to plants 8 to 10 cm in height. Relative resistance factors (RRFs) were calculated for control ratings, mortality, and biomass, and ranged from 105 to 318, 36 to 1,477, 215 to 316, and 9 to 49 for fomesafen, lactofen, acifluorfen, and trifludimoxazin, respectively. In the PRE experiment, herbicide applications included five to nine doses of fomesafen (1× = 210 g ai ha–¹), flumioxazin (1× = 57 g ai ha–¹), oxyfluorfen (1× = 561 g ai ha–¹), and trifludimoxazin (1× = 38 g ai ha–¹); doses ranged from 0× to 6× for the suspect population and 0× to 2× for the susceptible population. Visual control, mortality, and biomass RRFs ranged from 3 to 5 for fomesafen, 21 to 31 for flumioxazin, 6 to 22 for oxyfluorfen, and 8 to 38 for trifludimoxazin. Results confirm that a Georgia Palmer amaranth population is resistant to PPO-inhibiting herbicides applied both PRE and POST.

Nomenclature: Aciflurofen; flumioxazin; fomesafen; lactofen; oxyfluorfen; trifludimoxazin; Palmer amaranth; Amaranthus palmeri S. Watson; cotton; Gossypium hirsutum L.; peanut, Arachis hypogaea L.; soybean, Glycine max (L.)

Cotton and soybean growers were offered new technologies in 2016, expanding in-crop herbicide options to include dicamba or 2,4-D. Within 3 yr of commercialization, dicamba use in these crops increased 10-fold, and growers began to report Palmer amaranth escapes in dicamba-tolerant production systems in western Tennessee. In 2020, Palmer amaranth seed was collected from eight Tennessee locations where growers witnessed poor control following dicamba. Greenhouse experiments were conducted to evaluate the response of these Palmer amaranth populations to dicamba. In 2021, field experiments were conducted on two tentative dicamba-susceptible populations in Georgia, on three confirmed dicamba-resistant populations in Tennessee, and on a tentative dicamba-susceptible population in Texas to evaluate cotton response following dicamba and to examine if malathion insecticide (a cytochrome P450 inhibitor) would improve weed control and not reduce cotton yield when applied in conjunction with dicamba. Palmer amaranth populations collected in 2020 survived dicamba in the greenhouse at 1, 2, and 4 times the labeled rate. Five Palmer amaranth populations exhibited 15% to 26% survival to the labeled dicamba rate (560 g ha^–1) in the greenhouse. These findings were reinforced in the field when research on three of those populations in 2021 showed 55% control with the labeled dicamba rate and 69% control with 2 times the labeled rate. This demonstrates that the dicamba resistance allele or alleles were passed between generations. This result was not consistent in the Macon County, GA, or Worth County, GA, locations, where malathion improved dicamba control of 15- to 38-cm-tall Palmer amaranth. Cotton injury was observed when malathion was applied in combination with dicamba. These results further document the evolution of dicamba-resistant Palmer amaranth in Tennessee. Moreover, the nonreversal of resistance phenotype by malathion may suggest that the resistance mechanism is something other than metabolism.

Nomenclature: Dicamba; malathion; cotton, Gossypium hirsutum L.; soybean, Glycine max (L.) Merr.; Palmer amaranth, Amaranthus palmeri S. Watson

This article overviews the earliest weed management book published in the United States. The most problematic weeds of that era are named, along with suggestions for their control.

Control of barnyardgrass is becoming increasingly difficult as plants evolve resistance to herbicides. ROXY oxyfluorfen-resistant rice (ROXY^® Rice Production System) has been developed to provide an alternative mode of action for controlling barnyardgrass and other weeds. In 2021 and 2022, field trials were conducted at the Pine Tree Research Station near Colt, AR; the Northeast Research and Extension Center in Keiser, AR; and the University of Arkansas Pine Bluff Small Farm Research Center near Lonoke, AR, to determine the level of weed control and crop tolerance following oxyfluorfen applied preemergence (PRE) or postemergence (POST) relative to herbicides currently labeled for use in rice crops. When applied post-plant PRE on silt loam soil, oxyfluorfen alone at 1,120 and 1,680 g ai ha^–1 resulted in barnyardgrass control comparable to that of clomazone applied alone at 336 g ha^–1. Still, injury to rice was often greater than with clomazone, ranging from 20% to 45%. On clay soil, oxyfluorfen applied at 1,680 g ha^–1 resulted in barnyardgrass control that was comparable to that of clomazone alone in both site-years at 3 wk after emergence but caused up to 18% injury to rice. When oxyfluorfen was applied at 560 to 1,680 g ha^–1 at the 2-leaf rice growth stage, barnyardgrass control was ≥85% in three of four site-years 1 wk after treatment. However, injury to rice ranged from 38% to 73% for the rates evaluated. Propanil caused the greatest injury by a herbicide currently labeled for use in rice at 34%. Oxyfluorfen should be used as a post-plant PRE herbicide rather than a POST herbicide due to the injury that occurred after a POST application. The data indicate that if used as a PRE herbicide, oxyfluorfen should be applied at 560 g ha^–1 to reduce the injury that occurred on silt loam and clay soils.

Nomenclature: Clomazone; oxyfluorfen; barnyardgrass; Echinochloa crus-galli (L.) P. Beauv.; rice; Oryza sativa L.

Soil-applied herbicides are important for controlling weeds in many crops but risk damage to susceptible rotational crops if they persist. Field studies were conducted in Powell, WY, from 2015 through 2017 to evaluate the effect of reduced water availability on soil-applied herbicide dissipation. Eight soil-applied herbicides, applied to dry bean or corn, were exposed to three season-long irrigation treatments (100%, 85%, and 70% of estimated crop evapotranspiration [ETc]) by overhead sprinkler. Soil samples were collected to a depth of 10 cm from 0 to 140 d after application, and soil herbicide concentrations were quantified using gas or liquid chromatography and mass spectrometry. Herbicide concentrations were regressed over time to produce a soil half-life estimate for each herbicide and irrigation treatment. Reduced irrigation decreased dry bean yield by up to 77% and corn yield by up to 50%. After adjusting for precipitation, the lowest irrigation treatment received 78% and 76% as much water as the full irrigation treatment in 2015 and 2016, respectively. This significantly increased the soil half-life of imazethapyr but did not increase the soil half-life of atrazine, pyroxasulfone, saflufenacil, ethalfluralin, trifluralin, or pendimethalin. Reduced irrigation did not increase carryover injury to rotational crops from these herbicides 1 yr after application. Instead, carryover response was determined by the inherent persistence of individual herbicides. Imazethapyr (0.1 kg ai ha^–1) injured rotational sugar beet, and isoxaflutole (0.1 kg ai ha^–1) injured rotational dry bean. Pyroxasulfone (0.2 kg ai ha^–1), atrazine (2.0 kg ai ha^–1), saflufenacil (0.1 kg ai ha^–1) + dimethenamid-P (0.6 kg ai ha^–1), ethalfluralin (0.8 kg ai ha^–1), trifluralin (0.6 kg ai ha^–1), and pendimethalin (1.1 kg ai ha^–1) did not injure rotational crops regardless of irrigation treatment. Drought stress sufficient to cause up to 77% crop yield loss did not increase soil-applied herbicide carryover.

Nomenclature: Atrazine; dimethenamid-P; ethalfluralin; imazethapyr; isoxaflutole; pendimethalin; pyroxasulfone; saflufenacil; trifluralin; corn, Zea mays L.; dry bean, Phaseolus vulgaris L.; sugar beet, Beta vulgaris L.

Florpyrauxifen-benzyl (FPB) is an important postemergence rice herbicide. This study tested the potential for seed production in an FPB-resistant barnyardgrass population. A barnyardgrass population (NL) collected from a rice field in eastern China was highly resistant to FPB with a GR₅₀ dose (the FPB dose causing a 50% reduction in fresh weight of aboveground parts) of 50.2 g ai ha^–1. No significant differences in the percentages of surviving seedlings after treatment with different doses of the herbicide were found between F₁ lines collected from F₀ plants surviving a 36 g ai ha^–1 FPB treatment and those collected from nontreated control F₀ plants. Additionally, no significant differences were found in the rate of surviving seedlings after treatment with varying doses of FPB among the F₂ lines collected from F₁ plants that survived varying doses of FPB. At a constant temperature of 30 C, seeds from different F₁ and F₂ lines showed germination percentages of 85% to 92.0% and 68.3% to 89.0%, respectively. In the absence of competition, plants from the NL population surviving 0–144 g ai ha^–1 FPB showed no significant differences in plant height, dry weight of aboveground parts, effective accumulated temperature (EAT) from sowing to seed maturation, seed production per plant, or 1,000-seed weight. In the susceptible population (HJ), plants surviving 18 g ai ha^–1 FPB showed no significant differences compared to the nontreated control plants of the same population for the above variables. This is the first report of FPB-resistant barnyardgrass in China. Barnyardgrass seedlings that survived FPB application showed a higher potential for accumulating in the soil seedbank and negatively affecting rice.

Nomenclature: Florpyrauxifen-benzyl (FPB); barnyardgrass, Echinochloa crus-galli (L.) P. Beauv.; rice, Oryza sativa L.

Managing winter annual grass weeds has long been a challenge in the dryland regions of the Pacific Northwest (PNW) where soft white winter wheat is grown. The recent development of quizalofop-resistant (CoAXium) wheat varieties allows growers to use quizalofop (QP), a herbicide that inhibits acetyl-CoA carboxylase (ACCase) for postemergence grass control. Field experiments were conducted over two winter wheat growing seasons in 2021–2022 and 2022–2023 near Adams, OR, to evaluate QP efficacy on feral rye and for crop safety. Downy brome and jointed goatgrass control with QP were assessed in 2021–2022 and 2022–2023, respectively. QP treatments provided effective control of feral rye (≥95%), downy brome (≥87%), and jointed goatgrass (99%) regardless of rate, adjuvant, and spray volume tested. Spring-applied QP caused no injury to winter wheat. Results indicate that the QP-resistant wheat technology can help PNW wheat growers selectively control winter annual grasses.

Nomenclature: Quizalofop; downy brome, Bromus tectorum L.; feral rye, Secale cereale L.; jointed goatgrass, Aegilops cylindrica Host.; wheat, Triticum aestivum L.

In New Mexico chile pepper production, pendimethalin is traditionally applied shortly after crop thinning, which is 9 to 10 wk after crop seeding. Pendimethalin applications before crop thinning may be a method for controlling early-season weeds in chile pepper; however, chile pepper tolerance to early-season applications of pendimethalin is poorly understood. We conducted a greenhouse study to evaluate young chile pepper responses to pendimethalin. We also conducted a field study to determine weed and chile pepper responses to early-season, postemergence-directed pendimethalin in combination with herbicides registered for preemergence applications. The greenhouse study included three treatments administered when chile pepper was at the four-leaf stage: (i) pendimethalin applied to foliage and soil, (ii) pendimethalin applied to soil only, and (iii) a nontreated control. The field study included four treatments: (i) preemergence applications of napropamide followed by postemergence-directed pendimethalin at 5 wk after crop seeding, (ii) preemergence applications of clomazone followed by postemergence-directed pendimethalin at 5 wk after crop seeding, (iii) postemergence-directed pendimethalin without preemergence herbicides, and (iv) nontreated, weed-free control. We conducted the field study at two sites that differed in soil texture. Pendimethalin application rates were maximum labeled rates for the specific soil. Results from the greenhouse study indicated that pendimethalin applied to foliage and soil stunted two of five cultivars, whereas pendimethalin applied to soil did not affect chile pepper height, fresh weight, dry weight, or root area. Results from the field study indicated that postemergence-directed pendimethalin did not affect chile pepper height or fruit yield, or cause visible symptoms of herbicide injury. Postemergence-directed pendimethalin reduced the densities of weeds, including junglerice. The results of this study indicate that postemergence-directed applications of pendimethalin at 5 wk after crop seeding do not cause crop injury or yield loss in chile pepper, while providing some weed control benefits.

Nomenclature: Clomazone; napropamide; pendimethalin; junglerice, Echinochloa colona (L.) Link ECHCO; chile pepper, Capsicum annuum L.

Palmer amaranth can grow 4.2 mm in height per degree day; hence, delays of a few days in weed control deployment can result in applications of herbicides to weeds that are larger than those for which the herbicide label recommends. Therefore, it is critically necessary to understand the effect of plant size at the time of herbicide application in conjunction with herbicide spray solution and nozzle type pairings on the effectiveness of weed management programs in the Enlist E3 and XtendFlex production systems. Field experiments were conducted in 2020, in no-crop conditions, at two locations in Arkansas, to evaluate the influence of Palmer amaranth size on its control with glufosinate, dicamba, and 2,4-D applied alone and in mixture with specific nozzle pairings as mandated by label requirements. Also, a laboratory experiment was conducted to evaluate the droplet size and velocity of the spray solutions and nozzles used in the field experiments. A 5- and 10-percentage point reduction in control was observed when dicamba (66%) and 2,4-D (63%) were applied alone, respectively, compared with those herbicides mixed with glufosinate (71% and 73%, respectively). Palmer amaranth density increased to 55, 73, 100, 115, and 140 plants m^–2 when plants were sprayed at heights of 15, 25, 41, 61, and 76 cm, respectively, compared with plants that were sprayed when they were 5 cm tall (9 plants m^–2). Nozzle type did not affect weed control or density. The percentage of driftable fines increased when a mixture of glufosinate and 2,4-D were used compared with 2,4-D alone. Effective short-term and long-term chemical control of Palmer amaranth will require growers to correctly time their weed management practices and overlay residuals, and expect the need for sequential applications.

Nomenclature: Dicamba; 2,4-D; glufosinate-ammonium; Palmer amaranth; Amaranthus palmeri S. Wats

A significant proportion of the forested production area in South Carolina is managed using aerial applications of imazapyr. Cotton injury from off-target movement of imazapyr has been observed in South Carolina. Field experiments were conducted twice at the Edisto Research and Education Center (EREC) in 2021 and 2022, and once at the Pee Dee Research and Education Center (PDREC) in 2022, to evaluate the response of cotton at two growth stages to imazapyr at 0.1×, 0.05×, 0.025×, 0.0125×, and 0.00625× of the normal use rate of 0.84 kg ae ha^–1. Injury to cotton at the vegetative stage was 86% and 74% at 0.1× and 0.05× imazapyr rates 28 d after application (DAA). Cotton height ranged from 23 to 93 cm at all three locations. Yield at the EREC location in 2021 was reduced by 79%, 48%, and 31% at the 0.1×, 0.05×, and 0.025× rates of imazapyr, respectively. Similar reductions from imazapyr were observed at both EREC and PDREC in 2022. Injury to cotton at the reproductive stage based on visual estimates at 28 DAA ranged from 95% to 64% for the 0.1× to 0.0125× rates, respectively. Cotton height at the reproductive stage was reduced to 59% of the untreated control 28 DAA when the 0.1× rate of imazapyr was applied. Seed cotton (which included both seed and lint) yield ranged from 0 to 2,880 kg ha^–1 at the three locations in both years. Seed cotton yield was lowest when imazapyr was applied at the 0.1× to 0.025× rates. Cotton exposure to imazapyr at the vegetative and reproductive growth stages resulted in plant injury, height, and yield reductions, especially at the higher rates of imazapyr. The greatest reduction in cotton growth and yield was observed after exposure at the reproductive growth stage regardless of imazapyr rate. In summary, the magnitude of cotton response to imazapyr depends on crop growth stage and imazapyr concentration at the time of exposure with the greatest impact occurring at the reproductive growth stage.

Nomenclature: Imazapyr; cotton, Gossypium hirsutum L. ‘Deltapine 2038 B3XF’

Carrier water quality is an important consideration for herbicide efficacy. Field and greenhouse studies were conducted from 2021 to 2023 to evaluate the effect of carrier water pH and hardness on imazapic efficacy for sicklepod control in peanut crops. In separate field experiments imazapic was applied postemergence at 0.071 kg ai ha^–1 with carrier water pH levels of 5, 6, 7, 8, or 9; and hardness levels of 0 (deionized water), 100, 200, 400, or 500 mg L^–1 of CaCO₃ equivalent. In greenhouse experiments, imazapic was applied to sicklepod that was either 10 cm, 15 cm, or 20 cm tall at similar carrier water pH levels and hardness levels of 0, 100, 200, 400, or 800 mg L^–1 of CaCO₃. In the field study, sicklepod control, density, and biomass reductions were lower with carrier water pH 5 or 9 compared with pH 7. In the greenhouse study, control was not different among carrier water pH levels when imazapic was applied to 10-cm-tall sicklepod; however, when applied to 15- or 20-cm-tall sicklepod, control was at least 25% greater with acidic (pH 5) compared to alkaline (pH 9) carrier water. Results from the field study showed that carrier water hardness ≤500 ppm did not reduce the efficacy of imazapic to control sicklepod. In the greenhouse study, regardless of sicklepod height, carrier water hardness of 800 mg L^–1 reduced sicklepod control by 15% and biomass reduction by 17% compared with deionized water (pH 7). The effects of carrier water pH and hardness on imazapic efficacy did not compromise peanut yield in the field study. However, this study indicates that both acidic and alkaline carrier water pH and hardness (800 mg L^–1 CaCO₃ L^–1) have the potential to reduce imazapic efficacy on sicklepod, and appropriate spray solution amendments maybe be needed to maintain optimum efficacy.

Nomenclature: Imazapic; sicklepod; Senna obtusifolia L.; peanut; Arachis hypogaea L.

Methiozolin is labeled for goosegrass and smooth crabgrass control in golf course putting greens, but no peer-reviewed literature exists regarding this use. Greenhouse experiments were conducted evaluating goosegrass and smooth crabgrass response to increasing rates of methiozolin as affected by weed growth stage. In general, as weed growth stage increased, the methiozolin rate required to reduce weed biomass 90% (WR₉₀) increased. Goosegrass was more sensitive to preemergence-applied methiozolin than smooth crabgrass, and the WR₉₀ was 30.4 and 118 g ai ha^–1 for goosegrass and smooth crabgrass, respectively. However, smooth crabgrass was generally more sensitive to postemergence-applied methiozolin than goosegrass. Subsequent field studies were conducted to evaluate goosegrass and smooth crabgrass control with methiozolin applied singularly or sequentially at standard preemergence timings. Results indicated methiozolin applied singularly or sequentially at the label-recommended rate (500 g ha^–1) is not persistent enough to provide season-long control of goosegrass and smooth crabgrass. Ten field studies were conducted in Alabama, California, Florida, and Virginia to evaluate frequent methiozolin application programs with the objective of providing selective, season-long goosegrass and smooth crabgrass control. Results from these studies indicate methiozolin can be safely applied to hybrid bermudagrass and creeping bentgrass putting greens despite exceeding the yearly maximum use rate for putting greens (2,500 g ha^–1) with some treatments. Methiozolin effectively controlled smooth crabgrass throughout the growing season in California and Virginia when 10 biweekly applications were applied at 250 g ha^–1 or higher. In Florida, methiozolin did not acceptably (80%) control goosegrass regardless of application rate. In Virginia, methiozolin acceptably controlled goosegrass only when applied at rates and frequencies that exceeded the maximum yearly methiozolin usage rate. These data indicate that methiozolin has the potential to control smooth crabgrass preemergence when applied frequently, but does not provide acceptable goosegrass control at labeled rates.

Nomenclature: Methiozolin; goosegrass, Eleusine indica L. Gaertn.; smooth crabgrass, Digitaria ischaemum Schreb.; creeping bentgrass, Agrostis stolonifera L.; hybrid bermudagrass Cynodon transvaalensis Burtt Davy x dactylon (L.) Pers

Targeted spraying application technologies have the capacity to drastically reduce herbicide inputs, but to be successful, the performance of both machine vision–based weed detection and actuator efficiency needs to be optimized. This study assessed (1) the performance of spotted spurge recognition in ‘Latitude 36’ bermudagrass turf canopy using the You Only Look Once (YOLOv3) real-time multiobject detection algorithm and (2) the impact of various nozzle densities on model efficiency and projected herbicide reduction under simulated conditions. The YOLOv3 model was trained and validated with a data set of 1,191 images. The simulation design consisted of four grid matrix regimes (3 × 3, 6 × 6, 12 × 12, and 24 × 24), which would then correspond to 3, 6, 12, and 24 nonoverlapping nozzles, respectively, covering a 50-cm-wide band. Simulated efficiency testing was conducted using 50 images containing predictions (labels) generated with the trained YOLO model and by applying each of the grid matrixes to individual images. The model resulted in prediction accuracy of an F1 score of 0.62, precision of 0.65, and a recall value of 0.60. Increased nozzle density (from 3 to 12) improved actuator precision and predicted herbicide-use efficiency with a reduction in the false hits ratio from ∼30% to 5%. The area required to ensure herbicide deposition to all spotted spurge detected within images was reduced to 18%, resulting in ∼80% herbicide savings compared to broadcast application. Slightly greater precision was predicted with 24 nozzles but was not statistically different from the 12-nozzle scenario. Using this turf/weed model as a basis, optimal actuator efficacy and herbicide savings would occur by increasing nozzle density from 1 to 12 nozzles within the context of a single band.

Nomenclature: Spotted spurge, Chamaesyce maculata (L.) Small; bermudagrass, Cynodon spp.

Herbicide-resistant barnyardgrass and weedy rice control, without crop injury, is a challenge for rice producers in the United States. Herbicides not initially labeled for rice, such as oxyfluorfen, are now being evaluated as new tools for weed control. The ROXY^® trait allows for the use of oxyfluorfen in rice for weed control preemergence and postemergence. Experiments were initiated in 2021 and 2022 to evaluate (1) the effectiveness of preemergence- and postemergence-applied oxyfluorfen on barnyardgrass and weedy rice, (2) the sensitivity of oxyfluorfen-resistant rice to oxyfluorfen as a function of application timing, and (3) the influence of soil moisture on oxyfluorfen-resistant rice sensitivity to oxyfluorfen. In the field, a rate response was observed for oxyfluorfen applied to weedy rice when averaged over application timings of 1-leaf, 2-leaf, 3-leaf, and tillering, with oxyfluorfen at 1,680 g ai ha–1 resulting in 81% and 72% control 7 d after application (DAA) in 2021 and 2022, respectively. Under greenhouse conditions, barnyardgrass and weedy rice control averaged by the rate of oxyfluorfen was ≥85 and ≥70%, respectfully, 7 DAA for the 1-, 2-, and 3-leaf rice growth stage timings. Preemergence applications of oxyfluorfen under 100% soil saturation resulted in 75% injury to oxyfluorfen-resistant rice, greater than all other soil moisture at 7 DAA. All postemergence applications of oxyfluorfen resulted in 63% to 70% injury to oxyfluorfen-resistant rice at 7 DAA, regardless of soil moisture. Barnyardgrass and weedy rice control with oxyfluorfen is achieved with timely applications; however, injury to oxyfluorfen-resistant rice is likely.

Nomenclature: Oxyfluorfen; barnyardgrass, Echinochloa crus-galli (L.) P. Beauv.; weedy rice, Oryza sativa L.; rice, Oryza sativa L.

Industrial hemp is a multipurpose crop cultivated for fiber, seed, human food, and animal feed. Hemp legalization in Texas creates a considerable potential to increase its acreage in semi-arid conditions; however, knowledge is limited on growing hemp optimally in Texas. Best management practices, including weed control, require evaluation for profitable hemp production. As little is known about the herbicide tolerance of hemp, field studies were conducted to test several soil-residual herbicides with different modes of action for phytotoxicity to two hemp cultivars, ‘Yuma’ and ‘Jinma’. The experimental units were randomized three times in a blocked split-plot design with hemp cultivars in the main plots and soil-residual herbicides in the subplots. Ethalfluralin, the mixture of sulfentrazone and S-metolachlor, prometryn, and S-metolachlor, resulted in 60% to 90% and 73% to 100% weed control as compared to the nontreated control in 2021 and 2022, respectively. The highest hemp germination, stand count, and plant height were observed with ethalfluralin and S-metolachlor herbicides; however, no significant differences were observed for hemp germination and plant height compared to the nontreated control. S-metolachlor, ethalfluralin, fomesafen, and prometryn resulted in similar hemp biomass compared to the nontreated control. Overall, the results indicate that hemp is tolerant to ethalfluralin, prometryn, and S-metolachlor, and these soil-residual herbicides were effective for weed control in hemp. The mixture of bicyclopyrone plus S-metolachlor, metribuzin plus S-metolachlor, and mesotrione should be avoided, as they caused significant injury to hemp plants. Future research is needed to test the efficacy of different preemergence and postemergence herbicides that can be used in industrial hemp grown under different environments, making sure the delta-9-tetrahydrocannabinol content of the hemp is below the legal content restrictions.

Nomenclature: Bicyclopyrone; ethalfluralin; fomesafen; mesotrione; metribuzin; prometryn; S-metolachlor; sulfentrazone; industrial hemp, Cannabis sativa L.

Common ragweed is a troublesome weed in many crops. Farmers and crop advisors in the coastal Mid-Atlantic region have reported inadequate control of common ragweed in soybean fields with glyphosate and other herbicide modes of action. To determine whether herbicide resistance was one of the causes of poor herbicide performance, 29 accessions from four states (Delaware, Maryland, New Jersey, and Virginia) where common ragweed plants survived herbicide applications and produced viable seeds were used for greenhouse screening. Common ragweed seedlings from those accessions were treated with multiple rates of cloransulam, fomesafen, or glyphosate, applied individually postemergence (POST). All accessions except one demonstrated resistance to at least one of the herbicides applied at twice the effective rate (2×), 17 accessions were two-way resistant (to glyphosate and cloransulam, or to glyphosate and fomesafen), and three-way resistance was present in eight accessions collected from three different states. Based on the POST study, five accessions were treated preemergence (PRE) with herbicides that inhibit acetolactate synthase (ALS), and two accessions were treated with herbicides that inhibit protoporphyrinogen oxidase (PPO). All accessions treated PRE with the ALS inhibitors chlorimuron or cloransulam demonstrated resistance at the 2× rates. Both accessions treated PRE with the PPO inhibitor sulfentrazone had survivors at the 2× rate. When the same accessions were treated PRE with fomesafen, one had survivors at the 2× rate, and one had survivors at the 1× rate. Results from these tests confirmed common ragweed with three-way resistance to POST herbicides is widespread in the region. In addition, this is the first confirmation that common ragweed accessions in the region are also resistant to ALS- or PPO-inhibiting herbicides when applied PRE.

Nomenclature: Chlorimuron; cloransulam; fomesafen; glyphosate; sulfentrazone; common ragweed, Ambrosia artemisiifolia L.; soybean, Glycine max L. Merr.

Waterhemp has evolved resistance to Group 2, 5, 9, 14, and 27 herbicides in Ontario, Canada, making control of this challenging weed even more difficult. Acetochlor is a Group 15, chloroacetanilide herbicide that has activity on many small-seeded annual grasses and some small-seeded annual broadleaf weeds, including waterhemp. The objective of this study was to ascertain if acetochlor mixtures with broadleaf herbicides (dicamba, metribuzin, diflufenican, sulfentrazone, or flumioxazin), applied preemergence (PRE), increase multiple-herbicide-resistant (MHR) waterhemp control in soybean. Five trials were conducted over 2 yr (2021 and 2022). The acetochlor mixtures caused ≤7% soybean injury, except acetochlor + flumioxazin, which caused 19% soybean injury. Acetochlor applied PRE controlled MHR waterhemp 89% at 4 wk after application (WAA). Dicamba, metribuzin, diflufenican, sulfentrazone, or flumioxazin controlled MHR waterhemp 59%, 67%, 58%, 64%, and 86%, respectively, at 4 WAA. Acetochlor applied in a mixture with dicamba, metribuzin, diflufenican, sulfentrazone, or flumioxazin provided good to excellent control of MHR waterhemp; control ranged from 91% to 98% but was similar to acetochlor applied alone. Acetochlor alone reduced MHR waterhemp density and biomass 98% and 93%; acetochlor + flumioxazin reduced waterhemp density and biomass by an additional 2% and 7%, respectively. This research concludes that acetochlor applied in a mixture with flumioxazin was the most efficacious mixture evaluated for MHR waterhemp control.

Nomenclature: Acetochlor; dicamba; diflufenican; flumioxazin; metribuzin; sulfentrazone; waterhemp, Amaranthus tuberculatus (Moq.) Sauer.; soybean, Glycine max (L.) Merr.

A Palmer amaranth biotype (CT-Res) with resistance to glyphosate was recently confirmed in a pumpkin field in Connecticut. However, the underlying mechanisms conferring glyphosate resistance in this biotype is not known. The main objectives of this research were 1) to determine the effect of plant height (10, 20, and 30 cm) on glyphosate resistance levels in CT-Res Palmer amaranth biotype, and 2) to investigate whether the target site–based mechanisms confer glyphosate resistance. To achieve these objectives, progeny seeds of the CT-Res biotype after two generations of recurrent selection with glyphosate (6,720 g ae ha–¹) were used. Similarly, known glyphosate-susceptible Palmer amaranth biotypes from Kansas (KS-Sus) and Alabama (AL-Sus) were included. Results from greenhouse dose-response studies revealed that CT-Res Palmer amaranth biotype had 69-, 64-, and 54-fold resistance to glyphosate as compared with the KS-Sus biotype when treated at heights of 10, 20, and 30 cm, respectively. Sequence analysis of the EPSPS gene revealed no point mutations at the Pro₁₀₆ and Thr₁₀₂ residues in the CT-Res Palmer amaranth biotype. Quantitative polymerase chain reaction analysis revealed that the CT-Res biotype had 33 to 111 relative copies of the EPSPS gene compared with the AL-Sus biotype. All these results suggest that the EPSPS gene amplification endows a high level of glyphosate resistance in the GR Palmer amaranth biotype from Connecticut. Because of the lack of control with glyphosate, growers should adopt the use of effective alternative preemergence and postemergence herbicides in conjunction with other cultural and mechanical tactics to mitigate the further spread of GR Palmer amaranth in Connecticut.

Nomenclature: Glyphosate; Palmer amaranth, Amaranthus palmeri S. Watson; pumpkin (Cucurbita pepo L.)

Currently, a limited number of herbicides is available to treat water-seeded rice in California, with widespread resistance to most of those herbicides. Because no resistant grasses showed resistance to pendimethalin, a series of studies were conducted to evaluate water-seeded rice response to pendimethalin. In a field study conducted at the Rice Experiment Station at Biggs, California, in 2020 and 2021, three pendimethalin formulations, a granule (GR), emulsifiable concentrate (EC), and capsule suspension (CS), were applied at 1.1, 2.3, and 3.4 kg ai ha^–1 rates, and at 5, 10, and 15 d after seeding onto water-seeded rice. In addition, a greenhouse study was conducted to examine the response of five common California rice cultivars to GR and CS formulation applications. Echinochloa control levels were reduced at 15 d after seeding after use of EC and CS formulations compared with earlier timings. In both years, rice grain yields were increased by 3,014 kg ha^–1 after application of pendimethalin at 3.4 kg ai ha^–1 when applied at 15 d after seeding compared with 5 and 10 d after seeding, and similar to 1.1 kg ai ha^–1 applications. The GR and CS were safer formulations based on a reduction in injury and an increase in grain yields compared to the EC formulation. Differences in seedling vigor across cultivars appeared to incur an advantage after a pendimethalin application. However, most cultivars evaluated for stand reduction and dry biomass demonstrated tolerance to GR and CS formulation applications only after rice reached the 3-leaf stage. In contrast, an application at 1-leaf stage rice reduced stand up to 68%. Application rate, timing, and formulation are important factors to consider if the use of pendimethalin in water-seeded rice is to be pursued.

Nomenclature: Pendimethalin; rice, Oryza sativa L.

Waterhemp is a summer annual, broadleaf weed with high fecundity, short seed longevity in the soil, and wide genetic diversity. Populations have evolved resistance to five herbicide modes of action (Groups 2, 5, 9, 14, and 27), which are present across southern Ontario; this has increased the challenge of controlling this competitive weed species in corn, the most important grain crop produced worldwide and the highest-value agronomic crop in Ontario. Acetochlor is a Group 15 soil-applied residual herbicide that has activity on many grass and broadleaf weeds but has yet to be registered in Canada. The objective of this study was to ascertain whether mixtures of acetochlor with flumetsulam, dicamba, atrazine, isoxaflutole/diflufenican, or mesotrione + atrazine applied preemergence would increase the control of multiple-herbicide-resistant (MHR) waterhemp in corn. Five field trials were conducted between 2022 and 2023. No corn injury was observed. Acetochlor applied alone controlled MHR waterhemp 97% 12 wk after application (WAA). All herbicide mixtures controlled MHR waterhemp similarly at ≥98% 12 WAA; there were no differences among herbicide mixtures. Flumetsulam, dicamba, and atrazine provided lower MHR waterhemp control than all other herbicide treatments and did not reduce density or biomass. Acetochlor reduced waterhemp density 98%, while the acetochlor mixtures reduced density similarly at 99% to 100%. This study concludes that the acetochlor mixtures evaluated provide excellent waterhemp control; however, control was not greater than acetochlor alone. Herbicide mixtures should be used as a best management practice to mitigate the evolution of herbicide resistance.

Nomenclature: Acetochlor; flumetsulam; dicamba; atrazine; isoxaflutole/diflufenican; mesotrione; waterhemp, Amaranthus tuberculatus (Moq.) Sauer; corn, Zea mays L.

Fall-sown cereal rye has gained popularity as a cover crop in vegetable production due to its weed-suppressive capabilities. However, previous research has shown that replacing preemergence and/or postemergence herbicide applications with roller-crimped rye has variable success at controlling weeds and maintaining vegetable cash crop yields. The objective of this research was to determine whether roller-crimped rye can provide season-long weed control and maintain sweet corn yield. Two rye cultivars (early vs. standard maturity) were compared at three seeding rates (150, 300, and 600 seeds m^–2) for their effect on weed control and sweet corn yield. The trial was conducted at three locations: Harrow, ON, and St. Jean-sur-Richelieu, QC, from 2019 to 2021; and Agassiz, BC, in 2019 and 2021. Results suggest that although the early-maturing cultivar allowed for earlier roller crimping in some locations, it was inferior at weed control and resulted in lower sweet corn yield than local standard cultivars. The average rye biomass was lower than the current literature recommendations, and the resulting level of weed control was not high enough to prevent sweet corn yield loss in cover crop treatments. Weed control provided by roller-crimped rye peaked between crimping and 8 wk after crimping and was highest in the standard cultivars sown at 300 and 600 seeds m^–2. Preliminary testing of supplemental postemergence weed control showed evidence for sweet corn yields comparable to the weed-free no-cover crop check. However, more research is needed. Overall, with the cultivars and seeding rates tested, roller-crimped rye is not a suitable stand-alone weed control option in sweet corn production. Given the benefits of cover crops, further research should evaluate its potential as a component of an integrated weed management program.

Nomenclature: Sweet corn; Zea mays L.; cereal rye; Secalecereale L.

Downy brome is a cleistogamous facultative winter-annual grass weed that invades cropland, pastureland, and ruderal areas in western North America. Glyphosate-resistant downy brome, the first known glyphosate-resistant grass weed in Canada, was confirmed in a glyphosate-resistant canola field in southern Alberta in 2021. A controlled-environment study was conducted to determine the impact of preemergence soil-applied residual herbicides on glyphosate-resistant and susceptible downy brome in two field soils. Flumioxazin/pyroxasulfone (70/89 g ai ha^–1), carfentrazone/pyroxasulfone (18/150 g ai ha^–1), sulfentrazone/ pyroxasulfone (100/100 or 150/150 g ai ha^–1), and saflufenacil/pyroxasulfone (36/120 g ai ha^–1) resulted in excellent (≥90%) visible control and downy brome biomass reduction 8 wk after treatment (WAT). The low rate of carfentrazone/pyroxasulfone (12/100 g ai ha^–1) resulted in good (≥80%) visible control and biomass reduction 8 WAT, while the low and medium rates of saflufenacil/pyroxasulfone (18/60 or 25/84 g ai ha^–1) resulted in ≥80% biomass reduction but suppression only (66% to 75%) based on visible control. Flumioxazin alone (105 g ai ha^–1) resulted in good visible control (81%) 8 WAT in a sandy loam soil, but poor (13%) control in a clay loam soil. Soil type affected plant growth as evidenced by reduced growth in the untreated sandy loam soil compared to clay loam soil. The glyphosate-resistant population emerged and grew more vigorously than the glyphosate-susceptible population resulting in greater plant densities in the untreated control and some less-effective herbicide treatments. These results suggest that mixtures of a protoporphyrinogen oxidase-inhibiting herbicide with the very-long-chain fatty acid elongase inhibitor pyroxasulfone applied preemergence at ≥89 g ai ha^–1 could be effective components of an herbicide layering strategy targeting glyphosate-resistant and glyphosate-susceptible downy brome.

Nomenclature: Carfentrazone; flumioxazin; glyphosate; pyroxasulfone; saflufenacil; sulfentrazone; downy brome, Bromus tectorum L.; canola, Brassica napus L.

Greenhouse trials were conducted to determine the response of stevia to reduced-risk synthetic and nonsynthetic herbicides applied over-the-top post-transplant. In addition, field trials were conducted with stevia grown in a polyethylene mulch production system to determine crop response and weed control in planting holes to reduced-risk synthetic and nonsynthetic herbicides applied post-transplant directed. Treatments included caprylic acid plus capric acid, clove oil plus cinnamon oil, d-limonene, acetic acid (200 grain), citric acid, pelargonic acid, eugenol, ammonium nonanoate, and ammoniated soap of fatty acids. Stevia yield (dry aboveground biomass) in the greenhouse was reduced by all herbicide treatments. Citric acid and clove oil plus cinnamon oil were the least injurious, reducing yield by 16% to 20%, respectively. In field studies, d-limonene, pelargonic acid, ammonium nonanoate, and ammoniated soap of fatty acids controlled Palmer amaranth (>90% 1 wk after treatment (WAT). In field studies caprylic acid plus capric acid, pelargonic acid, and ammonium nonanoate caused >30% injury to stevia plants at 2 WAT, and d-limonene, citric acid, acetic acid, and ammoniated soap of fatty acids caused 18% to 25% injury 2 WAT. Clove oil plus cinnamon oil and eugenol caused <10% injury. Despite being injurious, herbicides applied in the field did not reduce yield compared to the nontreated check. Based upon yield data, these herbicides have potential for use in stevia; however, these products could delay harvest if applied to established stevia. In particular, clove oil plus cinnamon oil has potential for use for early-season weed management for organic production systems. The application of clove oil plus cinnamon oil over-the-top resulted in <10% injury 28 d after treatment (DAT) in the greenhouse and 3% injury 6 WAT postemergence-directed in the field. In addition, this treatment provided 95% control of Palmer amaranth 4 WAT.

Nomenclature: Acetic acid; ammoniated soap of fatty acids; ammonium nonanoate; caprylic acid plus capric acid; clove oil plus cinnamon oil; d-limonene; citric acid; eugenol; pelargonic acid; Amaranthus palmeri S. Watson; stevia, Stevia rebaudiana Bertoni

Barnyardgrass and other troublesome weeds have become a major problem for producers in a flooded rice system. Cultural control options and more efficient herbicide applications have become a priority to increase efficiency and weed control in rice. This study aimed to determine the effects of row width and nozzle selection on spray coverage and weed control in a flooded rice system. A field experiment was conducted at 7 site-years (Lonoke, AR, in 2021 and 2022; Pine Tree, AR, in 2021 and 2022; Rohwer, AR, in 2022; and Stoneville, MS, in 2021 and 2022) as a randomized complete block split-plot design. Five nozzles (XR, AIXR, TTI, TTI60, and AITTJ60) (subplot factor) were used for herbicide applications, and plots were drill-seeded in four row widths (whole plot factor) (13, 19, 25, and 38 cm). A droplet size experiment was conducted to evaluate the droplet size and velocity of each nozzle type used in the field experiment. Overall, as row width increased, barnyardgrass density increased. The rice grown in a wider width took longer to generate canopy closure, allowing weed escapes in the crop. For example, the 13-cm width had a 12 percentage point canopy coverage increase compared to the 38-cm row width at the preflood timing resulting in a reduction of six barnyardgrass plants per square meter. The smallest droplet size-producing nozzle (XR) provided greater weed control throughout the study but is more prone to drift. The dual-fan nozzles (AITTJ60 and TTI60) had variable weed control impacts, and it was difficult to predict when this might occur; however, they did have increased deposits on water-sensitive cards compared to single-fan counterparts (AIXR and TTI). In conclusion, a narrower row width (e.g., 19-cm or less) and a smaller droplet size producing nozzle (XR) are optimal for barnyardgrass control in a flooded rice system.

Nomenclature: Barnyardgrass, Echinochloa crus-galli (L.) P. Beauv.; rice, Oryza sativa L.

Pink purslane is often ranked as one of the most troublesome weeds in vegetable production systems in Georgia. Pink purslane encroachment along field edges and in-field of agronomic crops has recently increased. Postemergence herbicides are an effective component of agronomic crop weed management. However, little research has addressed pink purslane control in agronomic crops. Therefore, greenhouse and field studies were conducted from 2022 to 2023 in Tifton, Georgia, to evaluate the response of pink purslane to postemergence herbicides commonly used in agronomic crops. Greenhouse screening provided preliminary evidence whereby 13 of the 21 postemergence herbicides evaluated provided ≥80% aboveground biomass reductions. These 13 herbicides were then used for field studies. Results from the field studies, pooled across two locations, indicated that only three of the 13 herbicides provided aboveground biomass reductions of ≥70% compared to the nontreated control. Those herbicides included atrazine at 1,682 g ai ha^–1, glufosinate at 656 g ai ha^–1, and lactofen at 219 g ai ha^–1 with 79%, 70%, and 83% biomass reduction, respectively (P < 0.05). This research suggests that many of the postemergence herbicides used on agronomic crops will not effectively control pink purslane. Thus, when trying to manage pink purslane with postemergence herbicides in agronomic crops, growers should plant crops or cultivars that are tolerant of either atrazine, glufosinate, lactofen, or a combination of these.

Nomenclature: Acifluorfen; atrazine; bentazon; carfentrazone; chlorimuron; dicamba; diclosulam; diuron; fomesafen; glyphosate; glufosinate; imazapic; lactofen; mesotrione; paraquat; tembotrione; tolpyralate; topramezone; 2,4-D choline; 2,4-DB; pink purslane, Portulaca pilosa L. PORPI

The spread of herbicide-resistant weeds is considered a major problem for rice production in California, and there is a need for new herbicides. Tetflupyrolimet is a new herbicide with a novel dihydroorotate dehydrogenase–inhibiting site of action that has strong activity on grasses. Three field studies were conducted at the California Rice Experiment Station in Biggs, CA, in 2022 and 2023 to (1) determine control of watergrass species and bearded sprangletop with tetflupyrolimet, (2) characterize the effects of tetflupyrolimet combined with other herbicides on weed control and rice, and (3) determine the response of rice cultivars to tetflupyrolimet. In the first study, tetflupyrolimet was applied at preemergence (PRE) or at the 1- to 2-leaf stage of rice (POST) at 0.1, 0.125, or 0.15 kg ai ha–¹ followed by carfentrazone. Tetflupyrolimet provided ≥99% control of watergrass species and 100% bearded sprangletop control regardless of the rate or application timing, while showing no crop injury symptoms or yield reduction. In the second study, tetflupyrolimet was applied PRE or POST at 0.1 or 0.15 kg ai ha–¹ followed by herbicides labeled for use in California rice production. Tetflupyrolimet provided ≥98% control of watergrass species, which was better than the grower standard treatment, and ≥97% control of bearded sprangletop. In the third study, tetflupyrolimet was applied PRE or POST at 0.125, 0.15, 0.25, or 0.3 kg ai ha–¹ followed by carfentrazone. The six California rice cultivars evaluated, ‘M-105’, ‘M-206’, ‘M-209’, ‘M-211’, ‘L-208’, and ‘CM-203’, did not show any trend of crop injury caused by tetflupyrolimet. Overall, tetflupyrolimet provided a high level of control of watergrass species and bearded sprangletop without causing visual rice injury or yield reductions, regardless of rice cultivar, when applied alone or in combination with commonly used sedge and broadleaf herbicides in California water-seeded rice.

Nomenclature: Tetflupyrolimet; carfentrazone; watergrass species, Echinochloa spp.; bearded sprangletop, Leptochloa fusca (L.) Kunth ssp. fascicularis (Lam.) N. Snow; rice, Oryza sativa L.

In Oklahoma, downy brome and cheat are difficult-to-control winter annual grasses. In the past, cheat infested most of the winter wheat hectares harvested in Oklahoma. Biotypes that are cross-resistant to acetolactate synthase–inhibiting herbicides have left growers with minimal management options for conventional and herbicide-tolerant systems. Field trials near Lahoma, Oklahoma, in 2019–2020 and 2020–2021 evaluated integrated management of cheat and downy brome using three strategies: planting date (optimal, delayed, and late), cultivar selection (high and low competitiveness), and herbicide choice (no herbicide, sulfosulfuron at 35.2 g ai ha–1 and pyroxsulam at 18.4 g ai ha–¹). Visual control, weed species present, wheat biomass at heading, and grain yield data were collected. In 2019–2020, 8 to 9 wk after treatment, visual control increased by 15% with the delayed planting compared with the optimal planting date and 14% with the late planting date. In 2020–2021, similar control (∼99%) was recorded for delayed and late plantings with 23% greater control than the optimal timing. Due to a lack of weed coverage, weed biomass in 2019–2020 had no response to planting date, cultivar, or herbicide treatment. Downy brome biomass during 2020–2021 was approximately 90% lower with delayed to late planting dates than the optimal planting date. In the same year, downy brome and cheat biomass were low (≤0.4 and 0.2 g m^–2) and 98% less after an herbicide application than a nontreated area. Wheat grain yield at the optimal planting date was greater than yields from delayed and late plantings in 2019–2020. A delay in planting from the optimal date to delayed or late timings decreased wheat yield by 14% and 21%, respectively. In 2020–2021, wheat yield from the late planting was reduced by 57% compared with the optimal planting yield. Delaying the planting date and the use of a common herbicide can suppress cheat and downy brome, but a decline in wheat yield may occur.

Nomenclature: Pyroxsulam; sulfosulfuron; cheat, Bromus secalinus L. BROSE; downy brome; Bromus tectorum L. BROTE; winter wheat, Triticum aestivum L. TRZAX

Field experiments were conducted at Clayton and Rocky Mount, North Carolina, during the summer of 2020 to determine the growth and fecundity of Palmer amaranth plants that survived glufosinate with and without grass competition in soybean crops. Glufosinate (590 g ai ha–¹) was applied at early postemergence (when Palmer amaranth plants were 5 cm tall), mid-postemergence (7–10 cm), and late postemergence (>10 cm) and at orthogonal combinations of those timings. Nontreated Palmer amaranth was grown in weedy (i.e., intraspecific and grass competition), weed-free in-crop (WFIC), and weed-free fallow (WFNC) conditions for comparisons. No Palmer amaranth plants survived the sequential glufosinate applications and control decreased as the plants were treated at a larger size in both experiments. The apical and circumferential growth rate of Palmer amaranth surviving glufosinate was reduced by more than 44% compared with the WFNC Palmer amaranth. The biomass of Palmer amaranth plants that survived glufosinate was reduced by more than 87% compared with the WFNC Palmer amaranth. The fecundity of Palmer amaranth that survived glufosinate was reduced by more than 70% compared with WFNC Palmer amaranth. Palmer amaranth plants that survived glufosinate were as fecund as the WFIC Palmer amaranth in both experiments in soybean fields. The results prove that despite the significant vegetative growth rate decrease of Palmer amaranth that survived glufosinate, plants can be as fecund as nontreated plants. The trends in growth and fecundity of Palmer amaranth that survives glufosinate with and without grass competition were similar. These results suggest that glufosinate-treated grass weeds may not reduce the growth or fecundity of Palmer amaranth that survives glufosinate.

Nomenclature: Glufosinate; Palmer amaranth, Amaranthus palmeri S. Watson; soybean, Glycine max L.

Goosegrass and smooth crabgrass in creeping bentgrass turf are difficult to control due to a lack of selective herbicides. Based on preliminary field observations, we hypothesized that paclobutrazol and flurprimidol would reduce the overall competitiveness of goosegrass and smooth crabgrass in creeping bentgrass. Greenhouse and field studies were designed to evaluate the effect of several plant growth regulators (PGRs) on goosegrass and smooth crabgrass competitive indices. In greenhouse studies, flurprimidol, paclobutrazol, trinexapac-ethyl, and prohexadione-calcium were applied either preemergence only or preemergence plus two biweekly postemergence applications to goosegrass and smooth crabgrass plants to simulate the first 1.5 mo of typical PGR programs used on golf courses. Two weeks after the final postemergence treatment, aboveground biomass and root biomass were recorded. Programmatic flurprimidol and paclobutrazol applications reduced smooth crabgrass aboveground biomass by 67% and 69%, respectively, and more than trinexapac ethyl or prohexadione-calcium. When averaged across application programs, flurprimidol and paclobutrazol reduced smooth crabgrass root biomass by 74% and goosegrass biomass by 73% to 80%. Field studies were established to further evaluate the influence of PGRs on smooth crabgrass coverage in creeping bentgrass turf. Treatments consisting of flurprimidol, trinexapac-ethyl, flurprimidol plus trinexapac-ethyl, paclobutrazol, and fenoxaprop-p were applied every 3 wk from April to August. Weed coverage data were collected throughout the growing season, and final smooth crabgrass control data were collected at the end of the season. In general, flurprimidol-containing treatments more effectively reduced smooth crabgrass coverage throughout the growing season than trinexapac ethyl. After the studies, regimens that contained flurprimidol controlled smooth crabgrass by 68% to 73%, greater than any other PGR program evaluated. Results from these studies indicate that flurprimidol may be used to effectively control smooth crabgrass or goosegrass in creeping bentgrass turf. These are the first reported data regarding the use of flurprimidol for smooth crabgrass or goosegrass control in turf.

Nomenclature: Fenoxaprop-p; flurprimidol; paclobutrazol; prohexadione-calcium; trinexapac ethyl; goosegrass, Eleusine indica L. Gaertn.; smooth crabgrass, Digitaria ischaemum Schreb.; creeping bentgrass, Agrostis stolonifera L.

Tiafenacil is registered in the United States for use in annual crops such as corn and soybean, but not on orchard crops. Field studies were conducted to determine orchard crop safety and efficacy of tiafenacil on important California orchard weeds. To evaluate crop safety, tiafenacil was applied at 74, 148, and 222 g ai ha^–1 alone and with 38 g ai ha^–1 of tolpyralate three times per year at the base of almond, pistachio, prune, and walnut trees. The first treatment was applied 2 mo after the trees had been transplanted. In all four tree crop experiments, treatments were applied once in May 2020, then three times again during the winter of 2021 and 2022 at 21-d treatment intervals. There were no visual foliar injury symptoms or treatment-related effects on tree trunk diameter change even at the highest tested rate of tiafenacil applied seven times over three growing seasons. In a separate study of weed control, in most instances, tiafenacil applied at 12 g ai ha^–1 performed similarly to that of tiafenacil plus glufosinate. Control of glyphosate-resistant hairy fleabane with tiafenacil applied alone at 25 g ai ha^–1 was 65% by 14 d after treatment. Tiafenacil applied at 50 g ai ha^–1 to hairy fleabane performed similarly to glufosinate plus glyphosate. In a greenhouse study, tiafenacil applied at 12 g ha^–1 provided 95% to 100% control of barnyardgrass and junglerice, and there was no significant difference between tiafenacil applied alone or with glufosinate. Saflufenacil applied alone or in a mixture with glufosinate was not as effective as the tiafenacil treatments for grass weed control. Based on experiments conducted over three growing seasons in four tree fruit and tree nut crops, tiafenacil crop safety appeared to be acceptable even at up to 2- or 3-fold the expected use rate.

Nomenclature: Glufosinate; glyphosate; saflufenacil; tiafenacil; tolpyralate; barnyardgrass; Echinochloa crus-galli (L.) P. Beauv.; hairy fleabane; Erigeron bonariensis L.; junglerice; Echinochloa colona (L.) Link.; almond; Prunus dulcis L.; pistachio; Pistacia vera L.; prune; Prunus domestica L.; walnut; Juglans regia L.

Bearded sprangletop is a problematic native grass weed in California's rice fields. The widespread and extensive use of acetyl-CoA carboxylase (ACCase)–inhibiting herbicides, such as cyhalofop-p-butyl (cyhalofop), has led to speculation that biotypes of bearded sprangletop have developed herbicide resistance to ACCase. The aim of this study was to evaluate suspected resistant bearded sprangletop biotypes, R1, R2, R3, and the susceptible biotype, S1, in terms of their levels of resistance to three ACCase-inhibiting herbicides and to characterize the molecular mechanisms of resistance. Dose–response experiments suggested that the biotype R1, R2, and R3 had high-level resistance to cyhalofop and to quizalofop-p-ethyl (quizalofop), but not clethodim. The study determined that the resistance to ACCase inhibitors was a target-site mechanism resulting from nucleotide substitution. The carboxyl transferase (CT) domain of the ACCase gene's sequence analysis revealed the substitutions Trp-2027-Cys for R1 and R2 biotypes and Ile-2041-Asn for the R3 biotype. This study revealed the presence of target-site resistance to cyhalofop and quizalofop in at least two mutation points in representative biotypes of bearded sprangletop in California. This research highlights the significance of careful herbicide selection due to weed species responding quite rapidly to selection pressure, so as to aid in managing bearded sprangletop in rice fields.

Nomenclature: Clethodim; cyhalofop-p-butyl; quizalofop-pethyl; bearded sprangletop; Leptochloa fusca ssp. fascicularis; rice; Oryza sativa L.

Introducing soybean cultivars resistant to 2,4-D and dicamba allowed for postemergence applications of these herbicides. These herbicides pose a high risk for off-target movement, and the potential influence on crops such as hemp is unknown. Two studies were conducted from 2020 through 2022 in controlled environments to evaluate hemp response to rates simulating off-target events of 2,4-D and dicamba. The objectives of these studies were to (1) determine the effects of herbicide (2,4-D and dicamba) and rate (1× to 1/100,000× labeled rate) on visible injury, height, and branching, and (2) determine the effect of 2,4-D rate (1× to 1/100,000× labeled rate) on visible injury, height, branching, and reproductive parameters. Herbicides were applied in the early vegetative stage, and evaluations took place 14 and 28 d after treatment (DAT) and at trial termination (42 DAT in the greenhouse trial and at harvest in the growth chamber trial). In the greenhouse study, 2,4-D and dicamba at the 1× rate, and the 1/10× rate of dicamba, caused 68%, 78%, and 20% injury 28 DAT, respectively. At the time of trial termination 42 DAT, plants treated with 1× rates of 2,4-D and dicamba, or 1/10× dicamba, were 19, 25, and 9 cm shorter than the nontreated control, respectively. Simulated off-target rates of 2,4-D and dicamba did not influence branching or plant weight at trial termination. In the growth chamber study, the 1× and 1/10× rates of 2,4-D caused 82% and 2% injury 28 DAT, respectively. Plant height, fresh weight, and cannabidiol (CBD) levels of plants treated with simulated off-target rates of 2,4-D were not different from the nontreated control. These studies suggest that hemp grown for CBD exposed to off-target rates of 2,4-D or dicamba in early vegetative stages may not have distinguishable effects 42 DAT or at harvest.

Nomenclature: 2,4-D; dicamba; hemp; Cannabis sativa L.; soybean; Glycine max (L.) Merr.

Flumioxazin and S-metolachlor are widely used in conventional sweetpotato production in North Carolina and other states; however, some growers have recently expressed concerns about potential effects of these herbicides on sweetpotato yield and quality. Previous research indicates that activated charcoal has the potential to reduce herbicide injury. Field studies were conducted in 2021 and 2022 to determine whether flumioxazin applied preplant and Smetolachlor applied before and after transplanting negatively affect sweetpotato yield and quality when activated charcoal is applied with transplant water. The studies evaluated five herbicide treatments and two activated charcoal treatments. Herbicide treatments included two flumioxazin rates, one S-metolachlor rate applied immediately before and immediately after transplanting, and no herbicide. Charcoal treatments consisted of activated charcoal applied at 9 kg ha^–1, and no charcoal. No visual injury from herbicides or charcoal was observed. Likewise, no effect of herbicide or charcoal treatment on no. 1, marketable (sum of no. 1 and jumbo grades), or total yield (sum of canner, no. 1, and jumbo grades) was observed. Additionally, shape analysis conducted on calculated length-to-width ratio (LWR) for no. 1 sweetpotato roots found no effect from flumioxazin at either rate on sweetpotato root shape. However, both Smetolachlor treatments resulted in lower LWR of no. 1 sweetpotato roots in 2021. Results are consistent with prior research and indicate that flumioxazin and S-metolachlor are safe for continued use on sweetpotato at registered rates.

Nomenclature: Flumioxazin; S-metolachlor; sweetpotato; Ipomoea batatas (L.) Lam.

Herbicides that inhibit 4-hydroxyphenylpyruvate dioxygenase (HPPD) can be mixed with herbicides that generate reactive oxygen species (ROS) to enhance the spectrum, level, speed, and consistency of weed control efficacy; however, mixtures of these herbicides can increase corn injury. A total of five field trials were conducted from 2021 to 2023 in Ridgetown, Ontario, to determine the sensitivity of two corn hybrids (‘DKC39-97’ and ‘B79N56PWE’) to tolpyralate plus ROS-generating herbicides (atrazine, bromoxynil, bentazon, or glufosinate) applied postemergence at the recommended rate (1×) and sequentially to represent a spray overlap (2×) in the field. Tolpyralate plus atrazine, bromoxynil, bentazon, or glufosinate (2× rates) caused greater corn injury to DKC39-97 than B79N56PWE corn at 1, 2, and 4 wk after treatment (WAT). Tolpyralate plus atrazine, bromoxynil, bentazon, or glufosinate (2× rates) caused 38%, 36%, 29%, and 18% injury to DKC39-97 corn, but only 5%, 20%, 9%, and 2% injury to B79N56PWE corn, respectively at 1 WAT. Corn injury to both hybrids decreased over time with ≤2% injury at 8 WAT. Tolpyralate + atrazine, bromoxynil, or bentazon (2× rates) caused a 17%, 16%, and 13% height reduction, respectively, of DKC39-97 corn at 2 WAT; however, tolpyralate + glufosinate did not reduce DKC39-97 corn height. Tolpyralate + bromoxynil or bentazon (2× rates) caused a 12% and 10% height reduction of B79N56PWE corn, respectively, at 2 WAT; however, tolpyralate + atrazine or glufosinate did not reduce B79N56PWE corn height. Tolpyralate + atrazine or glufosinate (2× rates) caused a greater corn height reduction of DKC39-97 corn than B79N56PWE corn at 2 WAT. Grain yield was on average 2% lower from DKC39-97 than B79N56PWE corn. Tolpyralate + bromoxynil or bentazon (2× rates) caused 7% and 6% corn grain yield reduction compared to tolpyralate plus glufosinate (2× rate). Results indicate that tolpyralate + ROS-generating herbicides can cause corn injury, which is influenced by corn hybrid and ROS-generating herbicide. Corn producers need to consider the differential sensitivity of corn hybrids and ROS-generating herbicides when using an HPPD-inhibiting herbicide for weed management.

Nomenclature: Atrazine; bentazon; bromoxynil; glufosinate-ammonium; tolpyralate; kochia, Kochia scoparia L.; redroot pigweed, Amaranthus retroflexus L.; barnyardgrass, Echinochloa crus-galli (L.) P. Beauv.; horseweed, Erigeron canadensis (L.) Cronq.; common ragweed, Ambrosia artemisiifolia L.; waterhemp, Amaranthus tuberculatus var. rudis; foxtails, Setaria spp.; corn, Zea mays L.

Complaints regarding the sensitivity of rice to florpyrauxifen-benzyl and off-target movement of the herbicide occurred following its commercial launch in 2018 in the midsouthern United States. These two concerns encouraged the exploration of an alternative application method for florpyrauxifen-benzyl in rice. A field study was conducted in 2020 and 2021 to determine if coating florpyrauxifen-benzyl on urea would reduce negative impacts of the herbicide to rice. Five commercial rice lines were evaluated: ‘Diamond', ‘Titan', ‘RT7321 FP', ‘RT7521 FP’, and ‘XP753’. Florpyrauxifen-benzyl coated on urea at a 2× rate (60 g ai ha^–1) reduced rice injury in one of five commercial rice lines in 2020 and four of five commercial rice lines in 2021, compared to spray applications at the same rate. In 2020, ‘RT7521 FP’ exhibited a 17-percentage point injury reduction when coating florpyrauxifen-benzyl on urea at a 2× rate vs. the same rate sprayed. In 2021, rice injury was reduced by 26, 10, and 27 percentage points in the commercial rice lines ‘Diamond’, ‘Titan’, and ‘XP753’, respectively, following coated urea vs. spray applications at 4 wk after treatment (WAT). ‘XP753’ exhibited reduced injury (15 percentage points) by coating florpyrauxifen-benzyl at a 1× rate (30 g ai ha^–1) 4 WAT in 2021, and another, ‘Diamond’, had comparable groundcover to nontreated plots when florpyrauxifen-benzyl was coated on urea at a 1× rate rather than the reductions observed from the spray application at a 2× rate. Yield differences were a function of urea rate rather than application method, where in six out of ten instances greater rough rice grain yield occurred at the higher rate. Findings from this experiment indicate that coating florpyrauxifen-benzyl on urea can reduce the amount of injury observed, especially in areas of overlap where you would have a 2× rate.

Nomenclature: Florpyrauxifen-benzyl; rice; Oryza sativa L.

Field horsetail (Equisetum arvense L.) is a perennial weed native to many areas of the northern hemisphere. Like other horsetail species, field horsetail is a spore-bearing plant from an ancient clade. Unlike some other horsetails, field horsetail is a problematic agricultural weed. It is especially difficult to control in low-tillage cropping systems. Neither chemical nor mechanical tactics are likely to achieve full control in a single operation. However, these tactics may be successfully combined in an integrated weed management program. This review summarizes available information about the biology, ecology, and management of field horsetail. We also note its potential value as a source of pharmaceutical compounds.

Sicklepod is one of the most difficult to control weeds in peanut production in the southeastern United States due to its extended emergence pattern and limited effective herbicides for control. Growers rely on preemergence herbicides as the foundation of their weed control programs; however, postemergence herbicides are often needed for season-long weed control. The objectives of this study were to evaluate the effect of planting pattern and herbicide combinations for sicklepod control in peanut crops. Due to rapid canopy closure, twin-row planting improved late-season sicklepod control by 13% and peanut yield by 5% compared with a single-row pattern. A preemergence application of fluridone, flumioxazin, or fluridone + flumioxazin provided 76% to 89% control of sicklepod 28 d after preemergence. Regardless of the herbicide applied preemergence, paraquat + bentazon + S-metolachlor applied early postemergence was required to achieve ≥90% sicklepod control 28 d after early postemergence. All preemergence herbicide treatments followed by (fb) S-metolachlor or diclosulam + S-metolachlor applied early postemergence provided <90% control 28 d after early postemergence. A mid-postemergence application of imazapic + dimethenamid-P + 2,4-DB controlled sicklepod by 67% to 79% prior to peanut harvest, and biomass reduction was unacceptable (<80%), resulting in difficulty in peanut digging. The highest peanut yield was observed when paraquat + bentazon + S-metolachlor was applied early postemergence fb imazapic + dimethenamid-P + 2,4-DB applied mid-postemergence. Based on the results of this study, a herbicide combination of paraquat + bentazon + S-metolachlor is an important early-season tool for controlling sicklepod in peanut crops. The results also showed that a twin-row planting pattern improved late-season sicklepod control but did not reduce herbicide input to protect peanut yield.

Nomenclature: Bentazon; diclosulam; dimethenamid-P; fluridone; flumioxazin; imazapic; paraquat; S-metolachlor; 2,4-DB; sickelpod; Senna obtusifolia L.; peanut; Arachis hypogaea L.

Nebraska is one of the top five corn-growing states in the United States, with the planting of corn on 3.5 to 4 million hectares annually. Harvest loss of corn results in volunteer corn interference in the crop grown in rotation. Estimating the extent of harvest loss and expected volunteer corn density is a key to planning an integrated volunteer corn management program. This study aimed to evaluate the harvest loss of corn and estimate the potential for volunteerism. Harvest loss samples were collected after corn harvest from a total of 47 fields in six counties, including 26 corn fields in 2020, and 21 fields in 2021, in south-central and southeastern Nebraska. An individual cornfield size was 16 to 64 ha. A total of 16 samples were collected from each field after corn harvest in 2020 and 2021. Harvest loss of corn was 1.5% and 0.7% of the average yield of 15,300 kg ha–¹ in 2020 and 2021, respectively. Corn harvest loss was 191 and 80 kg ha–¹ from dryland fields, and 206 and 114 kg ha–¹ from irrigated fields in 2020 and 2021, respectively. An average kernel loss of 68 and 33 m^–2 occurred in 2020 and 2021, respectively. The germination percentage of corn kernels collected from harvest loss was 51%, which implies that volunteer corn plants of 35 and 17 m^–2 from 2020 and 2021, respectively, could be expected in successive years. A volunteer corn management plan is required, because if it is not controlled, this level of volunteer corn density can cause yield reduction depending on the crop grown in rotation.

Nomenclature: Corn; Zea mays L.

Integrated weed management practices that reduce selection for resistance on herbicides are critical to delay resistance. To quantify the reduction in selection for resistance placed on Palmer amaranth from 2,4-D applied postemergence in cotton, an experiment was conducted three times in Georgia during 2020 and 2021 evaluating the benefits of (i) a cover crop, (ii) preemergence herbicides, and (iii) timeliness of applications. When a timely total-postemergence program of glyphosate + 2,4-D was applied three times over the season in a conventionally tilled system, 281,690 glyphosate-resistant Palmer amaranth plants ha–¹ were exposed to 2,4-D. Over 61,500 of these plants were exposed to multiple 2,4-D applications. Altering the production system to conservation tillage, and including a rolled-rye cover crop, reduced the total number of plants exposed to 2,4-D for the season by 72% and the number of plants exposed multiple times by 60%. Even more effective, including a mixture of residual preemergence herbicides reduced the number of plants exposed to 2,4-D at least once over 99.9%, and reduced multiple exposures over 99.3% for the season; this benefit was observed for both conventional and conservation tillage systems. Delaying the initial application of the total-postemergence program did not influence the number of Palmer amaranth plants treated at least once but increased the number of plants treated multiple times by a factor of 3.7 times. As a result of early-season weed competition, cotton height and yield reductions were also associated with both lack of preemergence residuals and delayed postemergence applications. When considering the goal of minimizing the number of Palmer amaranth treated with a postemergence application of 2,4-D in a cotton system, the preemergence was the most effective option followed by (fb) the cover crop fb making timely postemergence applications. However, the most effective approach was to utilize each of these tactics in the same growing season.

Nomenclature: 2,4-D; glyphosate; Palmer amaranth; Amaranthus palmeri S. Watson; cotton; Gossypium hirsutum

Mixing ammonium sulfate (AMS) can increase dicamba volatility. Therefore, AMS cannot be used with dicamba products in dicamba-resistant soybean. However, most dicamba products applied in corn are labeled to mix with AMS. The objectives of this study were to evaluate broadleaf weed control with dicamba (DiFlexx®) and dicamba/tembotrione (DiFlexx® DUO) applied alone or with AMS or AMS substitute and their effect on broadleaf weed density and biomass. Field experiments were conducted in Illinois, Missouri, and Nebraska in 2018 and 2019. In Illinois and Nebraska, mixing AMS + crop oil concentrate (COC) with dicamba applied at 1,120 g ae ha–¹ increased the control of Palmer amaranth and waterhemp (Amaranthus species) from 78% to 92% and velvetleaf from 73% to 96% compared with dicamba applied alone 14 d after application (DAA); however, Missouri data showed no difference. Mixing AMS + COC with dicamba/tembotrione at 597 and 746 g ai ha–¹ did not improve broadleaf weed control 14 DAA at any site compared with dicamba/tembotrione applied alone. Control of Amaranthus species was increased from 82% with dicamba applied at 840 g ae ha–¹ to 96% when mixed with AMS + COC 28 DAA in Illinois; however, control was similar to dicamba applied at 1,120 g ae ha–¹. Broadleaf weed control did not differ among dicamba or dicamba/tembotrione 28 and 56 DAA in Missouri and Nebraska. Broadleaf weed density decreased from 64 plants m^–2 to 24 plants m^–2 with dicamba at 1,120 g ae ha–¹ with AMS + COC 14 DAA in Nebraska; however, no differences were observed in broadleaf weed density or biomass 56 DAA in any state. The results suggest that dicamba or dicamba/ tembotrione can be applied without AMS or AMS substitute, especially at higher rates, without losing broadleaf weed control efficacy.

Nomenclature: Dicamba; dicamba/tembotrione; Palmer amaranth; Amaranthus palmeri S. Watson (AMAPA); velvetleaf; Abutilon theophrasti Medik. (ABUTH); waterhemp; Amaranthus tuberculatus (Moq.) J.D. Sauer (AMATU); corn; Zea mays L.; soybean; Glycine max (L.) Merr.

Florpyrauxifen-benzyl has generated complaints and concerns around rice injury and off-target movement to soybean since its commercial launch in 2018. Developing a precise method for applying florpyrauxifen-benzyl was imperative for its continued use. Experiments were conducted in 2020 and 2021 to evaluate rice weed control as influenced by preflood application interval and flood loss following florpyrauxifen-benzyl at 30 g ai ha^–1 applied as a spray or coated on urea. In a preflood application experiment, coating florpyrauxifen-benzyl on urea and applying it the day of flood establishment and 5 and 10 d prior to flooding (DPTF) resulted in lower yellow nutsedge, broadleaf signalgrass, and barnyardgrass control than when the herbicide was spray at 3 and 5 wk after final treatment (WAFT). Coating florpyrauxifen-benzyl onto urea provided only 61% to 63% yellow nutsedge control at 3 and 5 WAFT, which was 35 to 37 percentage points lower than when the spray was applied at 5 or 10 DPTF. Likewise, rice yields following applications of florpyrauxifen-benzyl coated onto urea were 1,200 kg ha^–1 less than yields following spray applications. Florpyrauxifen-benzyl coated onto urea and clomazone provided lower levels of weed control than spraying the herbicide alone, suggesting an explanation for the yield losses. The timing of flood loss experiment suggested that when florpyrauxifen-benzyl coated onto urea at 30 g ai ha^–1 was applied preflood and flood was relinquished at 2 h, 24 h, and 7 d after flood establishment, hemp sesbania and yellow nutsedge control were not affected. However, loss of floodwater 2 h after flood establishment resulted in lower barnyardgrass control than when the flood was lost 24 h and 7 d after flooding. Generally, the period between a herbicide application and flooding completion should be minimized to aid in weed control. These results indicate the importance of maintaining a flood for weed control and nutrient management.

Nomenclature: Clomazone; florpyrauxifen-benzyl; barnyardgrass; Echinochloa crus-galli (L.) P. Beauv.; hemp sesbania; Sesbania herbacea (Mill.) McVaughn; yellow nutsedge; Cyperus esculentus L.; rice; Oryza sativa L.; soybean; Glycine max (L.) Merr.

Organic sweetpotato growers have limited effective weed management options, and most rely on in-season between-row cultivation and hand weeding, which are time consuming, are costly, and deteriorate soil quality. Studies were conducted at the Samuel G. Meigs Horticulture Research Farm, Lafayette, IN, and at the Southwest Purdue Agricultural Center, Vincennes, IN, in 2022 and 2023 to determine the effects of in-row plant spacing and cultivar selection on weed suppression and organic sweetpotato yield. The experiment was a split-split plot design, with in-row spacings of 20, 30, and 40 cm as the main plot factor, weeding frequency (critical weed-free period and weed-free) as the subplot factor, and sweetpotato cultivar (‘Covington' and ‘Monaco') as the sub-subplot factor. However, in 2022, we evaluated only in-row spacing and weeding frequency because of the poor establishment of ‘Monaco’. In 2023, sweetpotato canopy at 5 wk after transplanting (WAP) decreased as in-row spacing increased from 20 to 40 cm, and sweetpotato canopy cover of ‘Monaco’ (62%) was greater than that of ‘Covington’ (44%). In-row spacing did not affect weed density at 4, 5, and 6 WAP. As in-row spacing increased from 20 to 40 cm, total sweetpotato yield pooled across both locations in 2023 decreased from 30,223 to 21,209 kg ha^–1 for ‘Covington’ and from 24,370 to 20,848 kg ha^–1 for ‘Monaco’; however, jumbo yield increased for both cultivars. Findings from this study suggest that an in-row spacing of 20 cm may provide greater yield than the standard spacing of 30 cm for both ‘Monaco’ and ‘Covington’.

Nomenclature: Sweetpotato; Ipomoea batatas (L.) Lam. ‘Covington’; ‘Monaco’

Off-target movement of growth regulator herbicides can cause severe injury to susceptible plants. Apart from not spraying on windy days or at excessive boom heights, making herbicide applications using nozzles that produce large droplets is the preferred method for reducing herbicide drift. Although large droplets maintain a higher velocity and are more likely to reach the leaf surface in windy conditions, their ability to remain on the leaf surface is poorly understood. Upon impact with the leaf surface, droplets may shatter, bounce, roll off, or be retained on the leaf surface. We examined how different nozzles, pressures, and adjuvants impact spray droplet adsorption on the leaf surface of common lambsquarters and soybean. Plants were grown in a greenhouse and sprayed in a spray chamber. Three nozzles (XR, AIXR, and TTI) were evaluated at 138, 259, and 379 kPa, respectively. Dicamba (0.14 kg ae ha–¹) was applied alone and with methylated seed oil (MSO), a non-ionic surfactant, silicone-based adjuvant, crop oil concentrate, or a drift reduction adjuvant. A 1,3,6,8-pyrene tetra sulfonic acid tetra sodium salt was added as a tracer. Dicamba spray droplet adsorption when using the XR nozzle, which produced the smallest spray droplets, was 1.75 times greater than when applied with the TTI nozzle with the largest spray droplets. Applying dicamba with MSO increased adsorption on leaf surfaces nearly 4 times the amount achieved without an adjuvant. The lowest application pressure (138 kPa) increased dicamba spray volume adsorbed more than 10% compared to the higher pressures of 259 and 379 kPa. By understanding the impacts of these application parameters on dicamba spray droplet adsorption, applicators can select application parameters, equipment, and adjuvants that will maximize the amount of dicamba spray volume retained on the target leaf surface while minimizing dicamba spray drift.

Nomenclature: Dicamba; common lambsquarters; Chenopodium album L.; soybean; Glycine max (L.) Merr.

Wild oat is a long-standing weed problem in Australian grain cropping systems, potentially reducing the yield and quality of winter grain crops significantly. The effective management of wild oat requires an integrated approach comprising diverse control techniques that suit specific crops and cropping situations. This research aimed to construct and validate a bioeconomic model that enables the simulation and integration of weed control technologies for wild oat in grain production systems. The Avena spp. integrated management (AIM) model was developed with a simple interface to provide outputs of biological and economic data (crop yields, weed control costs, emerged weeds, weed seedbank, gross margins) on wild oat management data in a cropping rotation. Uniquely, AIM was validated against real-world data on wild oat management in a wheat and sorghum cropping rotation, where the model was able to reproduce the patterns of wild oat population changes as influenced by weed control and agronomic practices. Correlation coefficients for 12 comparison scenarios ranged between 0.55 and 0.96. With accurate parameterization, AIM is thus able to make useful predictions of the effectiveness of individual and integrated weed management tactics for wild oat control in grain cropping systems.

Nomenclature: Wild oat; Avena fatua L.; A. sterilis L. ssp. ludoviciana (Durieu) Gillet & Magne; sorghum; Sorghum bicolor (L.) Moench; wheat; Triticum aestivum L.

Amaranthus species are problematic weeds in snap bean production systems. They reduce crop yields, and their stem fragments contaminate harvested pods. Knowledge of snap bean tolerance to different preemergence herbicides is limited; however, knowing this tolerance is essential for planning a reliable weed management system, breeding herbicide-tolerant cultivars, and registering herbicides for use on minor crops such as snap bean. Field trials were conducted in 2021 and 2022 to determine the tolerance of eight snap bean cultivars to preemergence herbicides with activity on Amaranthus species, including dimethenamid-P, flumioxazin, lactofen, metribuzin, saflufenacil, and sulfentrazone. Snap bean plant density (number of plants per square meter), plant biomass (grams per plant), and canopy biomass (grams per square meter) 21 d after treatment were used to assess crop tolerance to a range of herbicide rates. Linear mixed-effects regression models were fitted to quantify the relationships between preemergence herbicide rate and snap bean cultivar tolerance. Results indicated a high margin of crop safety with dimethenamid-P and lactofen for weed control in snap bean, and a low margin of crop safety with metribuzin and saflufenacil. Results indicated differential cultivar tolerance to flumioxazin and sulfentrazone, which could be driven by genetic variability among cultivars.

Nomenclature: Dimethenamid-P; flumioxazin; lactofen; metribuzin; saflufenacil; sulfentrazone; waterhemp, Amaranthus tuberculatus (Moq.) J. D. Sauer; snap bean, Phaseolus vulgaris L.

Amicarbazone, atrazine, and metribuzin behavior was examined in a field setting in Tennessee and in a laboratory setting using soils collected from Illinois and Tennessee. Fields planted to corn were sampled from 0 to 8 cm depth, and the samples were analyzed using methanolic extraction followed by tandem mass spectrometry analysis to determine residual herbicide concentrations. Conditions were favorable for herbicide degradation, including warm temperatures and adequate rainfall. All herbicide half-lives were <10 d. Laboratory research using soils with known atrazine-use histories showed that amicarbazone did not exhibit enhanced microbial degradation due to previous atrazine use. Apparent amicarbazone and metribuzin persistence levels implied that early-season weed control would be expected, but carryover to injure sensitive rotational crops would not be anticipated under these environmental conditions. Dissipation under field conditions of amicarbazone and metribuzin was not affected by being applied to separate plots or by coapplication to the same plots.

Nomenclature: Amicarbazone; atrazine; metribuzin; corn; Zea mays L.

Postemergence (POST) herbicides that control troublesome weeds during hybrid bermudagrass establishment via sprigs are limited due to potential turfgrass phytotoxicity and herbicide-resistant weeds. Research experiments were conducted in Blacksburg, VA, and Hope, AR, in 2016 and 2023 to evaluate herbicide programs to control goosegrass and smooth crabgrass and the response of hybrid bermudagrass sprigs to POST herbicides applied 3 to 5 wk after establishment (WAE). Another study was conducted to assess the tolerance of ‘Latitude 36’, ‘Tahoma 31’, and ‘TifTuf’ hybrid bermudagrass sprigs to POST herbicides applied 4 to 5 WAE. Thiencarbazone + foramsulfuron + halosulfuron did not injure hybrid bermudagrass > 6% across four cultivars and a total of 10 site-yr but reduced goosegrass and smooth crabgrass cover equivalent to the best-performing treatments. Topramezone + metribuzin injured turfgrass > 25% at 14 d after treatment (DAT), but tank mixing with thiencarbazone + foramsulfuron + halosulfuron reduced injury by 5% to 22%. Quinclorac injured hybrid bermudagrass 17% to 58%, depending on site, which was more than most other treatments. Mesotrione-, quinclorac-, or topramezone-based programs injured hybrid bermudagrass and also reduced turfgrass cover, the dark green color index, and the normalized difference vegetation index, but turfgrass recovered by 28 DAT. Results suggest that turfgrass managers have a variety of herbicides that can control smooth crabgrass and goosegrass during hybrid bermudagrass sprig establishment, but the margin of selectivity is relatively low for mesotrione, quinclorac, and topramezone and may be dependent on herbicide rate or hybrid bermudagrass cultivar.

Nomenclature: Foramsulfuron; halosulfuron; mesotrione; metribuzin; quinclorac; thiencarbazone; topramezone; goosegrass, Eleusine indica (L.) Gaertn.; smooth crabgrass, Digitaria ischaemum (Schreb.) Schreb. ex Muhl.; hybrid bermudagrass, Cynodon dactylon (L.) Pers. × Cynodon transvaalensis Burtt Davy

Georgia growers can benefit from double-cropping grain sorghum following watermelon to maximize land use and add economic value to their operations. However, capitalizing on the economic advantages of harvesting two crops within a single season must account for potential herbicide injury to rotational crops. An integrated weed management strategy that includes a preplant application of fomesafen and terbacil is recommended for weed control in watermelon production systems. However, currently labeled plant-back restrictions for grain sorghum require a minimum of 10 and 24 mo for fomesafen and terbacil, respectively. Therefore this research aimed to determine the tolerance of grain sorghum to fomesafen and terbacil following soil applications applied 90 to 100 d before planting (DBP). Experiments were conducted at the University of Georgia Ponder Research Farm from 2019 to 2023. The experimental design was a randomized complete block with four replicates. Five rates of fomesafen (35, 70, 140, 210, and 280 g ai ha^-1), four rates of terbacil (3.5, 7.0, 10.5, and 14.0 g ai ha^-1), and a nontreated control were evaluated. In 2019, fomesafen caused significant sorghum leaf necrosis, plant density reductions, height reductions, and yield reductions of at least 16%, especially when applied at rates ≥ 210 g ai ha^-1. Terbacil had little to no effect on sorghum injury, density, height, or yield in any year. These results suggest that sorghum has sufficient tolerance to terbacil when applied 90 to 100 DBP. In four of five years, sorghum had an acceptable tolerance to fomesafen when applied 90 to 100 DBP. However, yield losses observed in 2019 suggest that caution should be taken when fomesafen is applied 90 to 100 DBP grain sorghum at ≥ 210 g ai ha^-1.

Nomenclature: Fomesafen; terbacil; grain sorghum; Sorghum bicolor (L.) Moench; watermelon; Citrullus lanatus (Thunb.) Matsum. & Nakai

Tiafenacil is a new nonselective protoporphyrinogen IX oxidase–inhibiting herbicide with both grass and broadleaf activity labeled for preplant application to corn, cotton, soybean, and wheat. Early season rice emergence and growth often coincide in the mid-southern United States with applications of preplant herbicides to cotton and soybean, thereby increasing the opportunity for off-target herbicide movement from adjacent fields. Field studies were conducted to identify any deleterious effects of reduced rates of tiafenacil (12.5% to 0.4% of the lowest labeled application rate of 24.64 g ai ha–¹) applied to 1- or 3-leaf rice. Visual injury 1 wk after treatment (WAT) for the 1- and 3-leaf growth stages ranged from 50% to 7% and 20% to 2%, respectively, whereas at 2 WAT these respective ranges were 13% to 2%, and no injury was observed. Tiafenacil applied at those rates had no negative season-long effect because observed early season injury was not manifested as a reduction in rice height 2 WAT or rough rice yield. Application of tiafenacil to crops directly adjacent to rice in its early vegetative stages of growth should be avoided because visual injury will occur. When off-target movement does occur, however, the affected rice should be expected to fully recover with no effect on growth or yield, assuming adequate growing conditions and agronomic/pest management are provided.

Nomenclature: Tiafenacil; corn; Zea mays L.; cotton; Gossypium hirsutum L.; soybean; Glycine max (L.) Merr.; rice; Oryza sativa L.; wheat; Triticum aestivum L.

Waterhemp is a dioecious species with wide genetic diversity which has enabled it to evolve resistance to several commonly used herbicide groups in North America. Five field trials were established in Ontario to ascertain the biologically effective doses of diflufenican, a new Group 12 herbicide applied preemergence for control of multiple herbicide–resistant (MHR) waterhemp in corn. Based on regression analysis, the predicted diflufenican doses to elicit 50%, 80%, and 95% MHR waterhemp control were 99, 225, and 417 g ai ha^-1, respectively, at 2 wk after application (WAA); 73, 169, and 314 g ai ha^-1, respectively, at 4 WAA; and 76, 215, and — (meaning the effective dose was beyond the set of doses in this study) g ai ha^-1, respectively, at 8 WAA. The predicted diflufenican doses that would cause a 50%, 80%, and 95% decreases in MHR waterhemp density were 42, 123, and — g ai ha^-1; and MHR waterhemp biomass were 72, 167, and 310 g ai ha^-1, respectively, at 8 WAA. Diflufenican applied preemergence at 150 g ai ha–1 controlled MHR waterhemp by 64%, 79%, and 73% at 2, 4, and 8 WAA, respectively. Isoxaflutole + atrazine applied preemergence at 105 + 1,060 g ai ha^-1 controlled MHR waterhemp by 98%, 98%, and 97% at 2, 4, and 8 WAA, respectively; and S-metolachlor/mesotrione/bicyclopyrone/ atrazine applied preemergence at 1,259/140/35/588 g ai ha^-1 controlled MHR waterhemp by 100%, 100%, and 99% at 2, 4, and 8 WAA, respectively. Diflufenican applied preemergence reduced MHR waterhemp density and biomass by 83%; in contrast, isoxaflutole + atrazine and S-metolachlor/mesotrione/bicyclopyrone/atrazine reduced MHR waterhemp density and biomass by 99%. All treatments evaluated caused either no, or minimal, corn injury and resulted in corn yield that was similar with the weed-free control. Results indicate that diflufenican applied alone preemergence does not provide superior MHR waterhemp control over the commonly used herbicides isoxaflutole + atrazine or S-metolachlor/mesotrione/bicyclopyrone/ atrazine; however, there is potential for using diflufenican as part of an integrated weed management strategy for the control of MHR waterhemp control in corn.

Nomenclature: Diflufenican; isoxaflutole + atrazine; S-metolachlor/mesotrione/bicyclopyrone/ atrazine; Palmer amaranth; Amaranthus palmeri S. Watson; waterhemp; Amaranthus tuberculatus (Moq.) J.D. Sauer.; corn; Zea mays L.

Deertongue is a perennial, warm-season grass, and is problematic in naturalized areas of golf courses due to limited control options. Research was conducted to evaluate several herbicides for deertongue control in naturalized areas consisting primarily of fine fescue. Greenhouse studies assessed 24 herbicide admixtures and indicated that fluazifop, glyphosate, imazapic, and thiencarbazone + iodosulfuron + dicamba (TID) reduced deertongue biomass by >80% at 10 wk after initial treatment (WAIT). Subsequent field trials were conducted on golf course naturalized areas. The first site was on a woodland edge and was partially shaded for 6 h each day, and the second trial site was 50 m away from the woodland edge and not subjected to more than 1 h of daily shade. At 9 WAIT, fluazifop at 420 g ai ha^-1 applied once or three times at 3-wk intervals and topramezone at 37 g ai ha^-1 applied thrice at 3-wk intervals injured fine fescue by ≤10% at both sites. Glyphosate applied at 1,120 g ae ha^-1, imazapic at 105 g ai ha^-1, and imazapic at 53 g ai ha^-1 tank-mixed with glyphosate at 560 g ae ha^-1 injured fine fescue by ≥50% under shaded conditions, whereas glyphosate alone did not injure fine fescue under sunny conditions. Fine fescue was completely recovered by 52 WAIT from injury following herbicide treatments, except for glyphosate-containing treatments at the shaded site and glyphosate + imazapic at both sites. At 52 WAIT, glyphosate-containing treatments and sequential applications of fluazifop controlled deertongue by ≥93% and reduced shoot density to ≤5 shoots m^–2 averaged over both sites. Fluazifop at 420 g ha^-1 applied thrice at 3-wk intervals selectively controls deertongue with excellent safety to fine fescue. Glyphosate also controls deertongue, but unacceptably injures fine fescue when managed under shaded conditions. Future research will assess how different light intensities influence fine fescue epicuticular wax deposits and associated response to glyphosate.

Nomenclature: Dicamba; fluazifop; glyphosate; iodosulfuron; imazapic; thiencarbazone; topramezone; deer tongue, Dichanthelium clandestinum L. (Gould); fine fescue, Festuca spp.

Benghal dayflower and sicklepod are weeds of economic importance in peanut in the southeastern United States due to their extended emergence pattern and limited effective herbicides for control. Field studies were conducted near Jay, Florida, in 2022 and 2023, to evaluate the effect of planting date and herbicide combinations on Benghal dayflower and sicklepod control in peanut crops. Peanut planted in June was exposed to a higher Benghal dayflower density than peanut planted in May. Sicklepod density was similar between May and June planting dates at 28 d after preemergence and early postemergence herbicide applications, but density was greater in peanut that was planted in June, 28 d after the mid-postemergence application. A preemeergence herbicide application followed by (fb) an early postemergence application of S-metolachlor or diclosulam + S-metolachlor controlled Benghal dayflower 84% to 93% 28 d after early postemergence in peanut that was planted in May, but control was reduced to 58% to 78% in the crop that had been planted in June. Regardless of planting date, a preemeergence application fb S-metolachlor or diclosulam + S-metolachlor applied early postemergence provided <80% sicklepod control 28 d after early postemergence. Imazapic + dimethenamid-P + 2,4-DB applied postemergence improved Benghal dayflower control to at least 94% 28 d after mid-postemergence, but sicklepod control was not >85%. Regardless of the planting date, paraquat + bentazon + S-metolachlor applied early postemergence was required to achieve ≥95% sicklepod control. However, herbicide combinations that included paraquat + bentazon + S-metolachlor reduced peanut yield when planting was delayed to June. In fields that are infested with Benghal dayflower and sicklepod, it is recommended that peanut be planted in early May to minimize the potential impact of these weeds and to increase peanut yield. Late-planted peanut required more intensive herbicide applications to obtain the same peanut yield as the May-planted peanut.

Nomenclature: Bentazon; diclosulam; dimethenamid-P; fluridone; flumioxazin; imazapic; paraquat; S-metolachlor; 2; 4-DB; Benghal dayflower; sickelpod; Senna obtusifolia (L.) H.S. Irwin & Barneby; Commelina benghalensis L.; peanut; Arachis hypogaea L.

Rice herbicide drift poses a significant challenge in California, where rice fields are near almond, pistachio, and walnut orchards. This research was conducted as part of a stewardship program for a newly registered rice herbicide and specifically aimed to compare the onset of foliar symptoms resulting from simulated florpyrauxifen-benzyl drift with residues in almond, pistachio, and walnut leaves at several time points after exposure. Treatments were applied to one side of the canopy of 1- and 2-yr-old trees at 1/100X and 1/33X of the florpyrauxifen-benzyl rice field use rate of 29.4 g ai ha^-1 in 2020 and 2021. Symptoms were observed 3 d after treatment (DAT) for pistachio and 7 DAT for almond and walnut, with peak severity at approximately 14 DAT. While almond and walnut symptoms gradually dissipated throughout the growing season, pistachio still had symptoms at leaf out in the following spring. Leaf samples were randomly collected from each tree for residue analysis at 7, 14, and 28 DAT. At 7 DAT with the 1/33X rate, almond, pistachio, and walnut leaves had florpyrauxifen-benzyl at 6.06, 5.95, and 13.12 ng g^–1 fresh weight (FW) leaf, respectively. By 28 DAT, all samples from all crops treated with the 1/33X drift rate had florpyrauxifen-benzyl at less than 0.25 ng g^–1 FW leaf. At the 1/100X rate, pistachio, almond, and walnut residues were 1.78, 2.31, and 3.58 ng g^–1 FW leaf at 7 DAT, respectively. At 28 DAT with the 1/100X rate, pistachio and almond samples had florpyrauxifen-benzyl at 0.1 and 0.04 ng g^–1 FW leaf, respectively, but walnut leaves did not have detectable residues. Together, these data suggest that residue analysis from leaf samples collected after severe symptoms may substantially underestimate actual exposure due to the relatively rapid dissipation of florpyrauxifen-benzyl in nut tree foliage.

Nomenclature: Florpyrauxifen-benzyl; almond, Prunus dulcis (Mill.) D.A. Webb; pistachio, Pistacia vera L.; rice, Oryza sativa L.; walnut, Juglans regia L.

Khakiweed is a perennial broadleaf weed that is difficult to control because of its multiple means of reproduction, vigorous growth, and deep taproot. Khakiweed reduces the performance of pasture, pecan, and turf areas by choking out desirable grass and legume species. Because information on the effectiveness of contact and residual herbicides for control in pecan and pasture areas is limited, greenhouse studies were conducted to determine the effect of application timing, mode of action, and rate on khakiweed control. Preemergence and postemergence herbicides were applied to mature khakiweed plants at 0.25X, 0.5X, 1X, or 2X the label recommended rate for general broadleaf control. Biomass was collected 3 wk after application. Plants regrew from roots in the greenhouse until a second biomass harvest was collected at 6 wk after treatment (WAT). Metsulfuron-methyl, indaziflam, or pendimethalin was applied preemergence to the soil surface. All rates of preemergence herbicides provided high-efficacy control of regrowth (>85%) compared to the nontreated control. The efficacies of postemergence-applied metsulfuron-methyl, metsulfuron-methyl + nicosulfuron, indaziflam, aminopyralid + florpyrauxifen-benzyl, 2,4-D amine, and 2,4-D amine + florpyrauxifen-benzyl were also examined. All postemergence herbicide treatments exhibited control compared to the nontreated plants at both sample timings (3 and 6 WAT) and increased with herbicide application rate. No herbicide provided high-efficacy control during the initial postspray period (0 to 3 WAT). During the regrowth period (3 to 6 WAT), metsulfuron-methyl alone and in combination gave >85% control of khakiweed biomass, indicating that the sulfonylurea herbicides used in this study are well suited to controlling khakiweed.

Nomenclature: Aminopyralid; florpyrauxifen-benzyl; indaziflam; metsulfuron-methyl; nicosulfuron; pendimethalin; 2,4-D; khakiweed, Alternanthera pungens Kunth; pecan, Carya illinoinensis (Wangenh.) K. Koch

Two separate field studies were conducted at two locations near Crowley, Louisiana, to evaluate early season applications of florpyrauxifen and a prepackaged mixture of halosulfuron plus prosulfuron in water-seeded rice production. In each study, florpyrauxifen and halosulfuron plus prosulfuron were applied at two rates and either applied to the soil surface 48 h before the seeding flooding and seeding, directly onto the pregerminated seed 24 h following seeding and immediately after removal of the seeding flood (SEED), and at pegging. Data suggest that both florpyrauxifen and halosulfuron plus prosulfuron have a role to play in water-seeded rice production. Crop injury of 19% was observed from applications of florpyrauxifen applied directly to pregerminated SEED. Additionally, 28% crop injury was observed when halosulfuron plus prosulfuron was applied directly to SEED. Due to crop injury observations, both herbicides should be avoided when the pregerminated seed is exposed to the soil surface after removing the seeding flood. These data suggest that florpyrauxifen may be a better option for postemergence application, whereas halosulfuron plus prosulfuron may be a better preemergence option in water-seeded rice production. Overall, the findings show that both herbicide technologies will provide adequate early-season weed control in water-seeded rice production.

Nomenclature: Florpyrauxifen; halosulfuron; prosulfuron; rice; Oryza sativa L.

All field scientists involved with weed management understand the importance of accurate weed identification and appreciate the need for widely recognized common names. USDA played a pivotal and critical role with the effort to advance our discipline while weed science was in its infancy.

Cover crop adoption is increasing among growers with the occurrence of herbicide-resistant weed species. A field study conducted at three sites from autumn 2021 through the crop harvest in 2022 in Alabama aimed to evaluate the combined effect of cover crop residue and herbicides for weed control and improved cotton lint yield. The experiment was conducted in split-plot design with main plots consisting of six cover crop treatments: cereal rye, crimson clover, oat, radish, cover crop mixture, and winter fallow. The subplots included four herbicide treatments: (i) preemergence, pendimethalin + fomesafen, (ii) postemergence, dicamba + glyphosate + S-metolachlor, (iii) preemergence followed by postemergence, and (iv) nontreated (NT) check. Cover crops, excluding radish, exhibited greater weed biomass reduction than winter fallow with corresponding herbicide treatments of either preemergence, postemergence, or preemergence + postemergence as compared to control (winter fallow and NT check). Considering preemergence + postemergence treatment, cereal rye, crimson clover, oat, and cover crop mixture provided >95% weed biomass reduction as compared to control. Looking at the overall effect of cover crop, cereal rye outperformed and showed greater weed biomass reduction than radish relative to control. Preemergence + postemergence herbicide treatment resulted in greater lint yield than other treatments. Cotton in cereal rye plots had a greater lint yield than in winter fallow at one out of three locations. In conclusion, integrating herbicides and incorporating high-residue cover crops such as cereal rye is an effective weed management strategy to control troublesome weeds.

Nomenclature: Dicamba; fomesafen; glyphosate; pendimethalin; S-metolachlor; cereal rye, Secale cereale L.; cotton, Gossypium hirsutum L.; crimson clover, Trifolium incarnatum L.; oat, Avena strigosa Schreb.; radish, Raphanus sativus L.